Re: 2.4 ... works

Re: 2.4 ... works

[Michel Dänzer]

Giuliano Pochini wrote:
>
> I compiled 2.4 for the first time.

Congrats! :)


> PPP doesn't work. Do I need a more recent pppd ?

An APUS user reported that pppd 2.3.10 doesn't work, so you probably need
2.3.11 or later.


Michel


--
Earthling Michel Dänzer (MrCooper)  \  CS student and free software enthusiast
Debian GNU/Linux (powerpc,i386) user \   member of XFree86, Team *AMIGA*, AUGS

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

Re: 2.4 ... works

[Michel Lanners]

On  15 Aug, this message from Giuliano Pochini echoed through cyberspace:
> At boot it complains: "PCI device 01:02.0 non available
> because of resource collisions" and again for 01:03.0.
> They are my 2 SCSI controllers... and it doesn't boot.
> I patches pci.c to ignore the error and now it seems to
> work fine, but I don't like that hack.

What SCSI controllers are those? Anyway, to get this resolved in a clean
way, you need the PCI resource allocation patches from Geert or me (but
I don't have updated patrches for 2.4.0-test kernels).

In any case, even with resource conflicts, it should boot fine, albeit
without the SCSI controllers.

Michel

-------------------------------------------------------------------------
Michel Lanners                 |  " Read Philosophy.  Study Art.
23, Rue Paul Henkes            |    Ask Questions.  Make Mistakes.
L-1710 Luxembourg              |
email   mlan@cpu.lu            |
http://www.cpu.lu/~mlan        |                     Learn Always. "


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

Re: 2.4 ... works

[Andreas Tobler]

Giuliano Pochini wrote:
>
> I compiled 2.4 for the first time.
>
> At boot it complains: "PCI device 01:02.0 non available
> because of resource collisions" and again for 01:03.0.
> They are my 2 SCSI controllers... and it doesn't boot.
> I patches pci.c to ignore the error and now it seems to

Still ? I try it in few hours, AHA2940UW...

> work fine, but I don't like that hack.
> PPP doesn't work. Do I need a more recent pppd ?

The latest is, last week or so, 2.4. ftp://linuxcare.com.au/pub/ppp
Works on both, stable and devel.

Andreas


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

2.4 ... works

[Giuliano Pochini]

I compiled 2.4 for the first time.

At boot it complains: "PCI device 01:02.0 non available
because of resource collisions" and again for 01:03.0.
They are my 2 SCSI controllers... and it doesn't boot.
I patches pci.c to ignore the error and now it seems to
work fine, but I don't like that hack.
PPP doesn't work. Do I need a more recent pppd ?


Bye.

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/