* 2.4.0-t8 (dumb question & two crashes)
@ 2000-09-20 15:38 Iain Sandoe
2000-09-20 15:48 ` Michel Dänzer
0 siblings, 1 reply; 4+ messages in thread
From: Iain Sandoe @ 2000-09-20 15:38 UTC (permalink / raw)
To: linuxppc-dev
OK...
I don't seem to be able to get modprobe to work on 2.4.0-t8 unless I move
the modules from where the build puts them into their old positions.
According to rpmfind I have the latest modutils... where am I going wrong?
====
It crashes (not got output from xmon yet) on my 9600 on reboot [don't know
where]
crashes on G3/beige on reboot (ditto on xmon output) but this time I'm
fairly sure it only crashes when it has an unknown USB device on the bus (an
epson styluscan 2500) - seems OK if the printer is switched off.
Iain.
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: 2.4.0-t8 (dumb question & two crashes)
2000-09-20 15:38 2.4.0-t8 (dumb question & two crashes) Iain Sandoe
@ 2000-09-20 15:48 ` Michel Dänzer
2000-09-20 19:38 ` Martin Costabel
0 siblings, 1 reply; 4+ messages in thread
From: Michel Dänzer @ 2000-09-20 15:48 UTC (permalink / raw)
To: Iain Sandoe; +Cc: linuxppc-dev
Iain Sandoe wrote:
> I don't seem to be able to get modprobe to work on 2.4.0-t8 unless I move
> the modules from where the build puts them into their old positions.
> According to rpmfind I have the latest modutils... where am I going wrong?
Wrong distro? ;^)
You need at least 2.3.14 or 13, Debian woody has it.
Michel
--
Earthling Michel Dänzer (MrCooper) \ CS student and free software enthusiast
Debian GNU/Linux (powerpc,i386) user \ member of XFree86 and The DRI Project
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: 2.4.0-t8 (dumb question & two crashes)
2000-09-20 15:48 ` Michel Dänzer
@ 2000-09-20 19:38 ` Martin Costabel
0 siblings, 0 replies; 4+ messages in thread
From: Martin Costabel @ 2000-09-20 19:38 UTC (permalink / raw)
To: Michel Dänzer; +Cc: Iain Sandoe, linuxppc-dev
Michel Dänzer wrote:
>
> Iain Sandoe wrote:
>
> > I don't seem to be able to get modprobe to work on 2.4.0-t8 unless I move
> > the modules from where the build puts them into their old positions.
> > According to rpmfind I have the latest modutils... where am I going wrong?
>
> Wrong distro? ;^)
>
> You need at least 2.3.14 or 13, Debian woody has it.
LinuxPPC has it, too: Version 2.3.15 is in
ftp://dev.linuxppc.org/users/fsirl/R5/RPMS/ppc/
--
Martin
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: 2.4.0-t8 (dumb question & two crashes)
@ 2000-09-20 21:05 Iain Sandoe
0 siblings, 0 replies; 4+ messages in thread
From: Iain Sandoe @ 2000-09-20 21:05 UTC (permalink / raw)
To: Martin Costabel, Michel Ddnzer; +Cc: linuxppc-dev
>> Wrong distro? ;^)
>>
>> You need at least 2.3.14 or 13, Debian woody has it.
>
> LinuxPPC has it, too: Version 2.3.15 is in
> ftp://dev.linuxppc.org/users/fsirl/R5/RPMS/ppc/
so much for rpmfind :-/
Thanks,
Iain.
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2000-09-20 21:05 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2000-09-20 15:38 2.4.0-t8 (dumb question & two crashes) Iain Sandoe
2000-09-20 15:48 ` Michel Dänzer
2000-09-20 19:38 ` Martin Costabel
-- strict thread matches above, loose matches on Subject: below --
2000-09-20 21:05 Iain Sandoe
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).