From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <39D0D4EC.44A255DB@mvista.com> Date: Tue, 26 Sep 2000 09:55:08 -0700 From: "Mark A. Greer" Reply-To: mgreer@mvista.com MIME-Version: 1.0 To: "ZHANG,HAI-TAO (Non-A-China,ex1)" CC: linuxppc-embedded@lists.linuxppc.org Subject: Re: Anybody get 2.4 successful with sandpoint? References: <2F67A63DFFB1D31185D90090278CBB2D01679E37@apmail6.chn.agilent.com> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: There is a sandpoint port to 2.4.0-test2 by MontaVista sitting at ftp://www.mvista.com/pub/Area51/sandpoint-8240/sandpoint.linux.tar.gz It can be built from with the 8240 tools from the MontaVista 1.2 CDK. It works on an 8240 and a 755/107 combo but there are some outstanding problems too that I have not yet had time to look at. Take a look, it may save you some time. I plan to bring it up to the latest kernel and push it up to the bitkeeper repos when my schedule permits. Mark -- "ZHANG,HAI-TAO (Non-A-China,ex1)" wrote: > Hi, > > Has anybody got successful boot of 2.4 kernel with sandpoint board? I am > using sandpoint 603e with lastest 2.4-test-9, but it still gets hang up > while executing /sbin/init. > > Thanks, > Haitao Zhang > -- Mark A. Greer (mgreer@mvista.com; 480-517-0287) MontaVista Software, Inc. 2141 E. Broadway Road, Suite 108 Tempe, AZ 85282 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/