From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3A006299.73525FEE@vnet.ibm.com> Date: Wed, 01 Nov 2000 12:36:09 -0600 From: Todd Inglett MIME-Version: 1.0 To: linuxppc-dev@lists.linuxppc.org Subject: Yet another RS6k whipped! Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Enclosed is the original boot log for Linux on a 43P-140 (200mhz). As you might guess it is still a way off from being useful. Thanks go to Tom Gall who did the initial work (but ran out of time) and Dave Monroe for being on irc when I got frustrated :). For those interested this box boots as prep but has an openpic. It can run with a chrp style memory map which is probably what I am going attempt next after installing something on the disk. This boot log is with a prep memory map. -- Todd Inglett 0 > boot floppy:,zimage \ loaded at: 00600400 00615220 relocated to: 00800000 00814E20 board data at: 00231318 00237D24 relocated to: 0080E314 00814D20 zimage at: 0060B400 0070384A relocated to: 00815000 0090D44A avail ram: 00400000 00800000 Linux/PPC load: console=ttyS0,9600 load_ramdisk=1 root=/dev/fd0 Uncompressing Linux...done. Now booting the kernel in prom_init offset=40000000 kernelbase=c0000000 ok...I am prep. phys=00000000 PReP architecture Total memory = 192MB; using 1024kB for hash table (at c0300000) Linux version 2.4.0-test8 (tinglett@tt.rchland.ibm.com) (gcc version 2.95.2 19991024 (release/franzo)) #88 Wed Nov 1 10:07:56 CST 2000 Boot arguments: console=ttyS0,9600 load_ramdisk=1 root=/dev/fd0 On node 0 totalpages: 49152 zone(0): 49152 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0,9600 load_ramdisk=1 root=/dev/fd0 prep_init_IRQ looking for OpenPIC in prep_init_IRQ initing for OpenPIC! OpenPIC Version 1.0 (4 CPUs and 16 IRQ sources) at f7fc0000 OpenPIC timer frequency is not set chrp_int_ack_special=0xeffffff0 time_init: decrementer frequency = 16.617035 MHz Console: colour dummy device 80x25 Calibrating delay loop... 398.13 BogoMIPS Memory: 189596k available (1600k kernel code, 824k data, 260k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Scanning bus 00 Found 00:00 [1057/0002] 000600 00 Found 00:58 [1014/000a] 000601 00 Found 00:60 [1022/2000] 000200 00 Found 00:68 [1014/0046] 00ff00 00 Found 00:80 [1000/0003] 000100 00 Found 00:b0 [5333/8811] 000300 00 Found 00:b8 [1014/0022] 000604 01 Fixups for bus 00 Scanning behind PCI bridge 00:17.0 Scanning bus 01 Found 01:18 [1014/0018] 000201 00 Fixups for bus 01 Bus scan for 01 returning with max=01 Bus scan for 00 returning with max=01 IBM ID: 000000d5 Setting PCI interrupts for a "IBM 140 (Tiger)" map 0:0 to irq 16 map 0:11 to irq 16 Relocating PCI address 3f7fe400 -> 17fe400 map 0:12 to irq 22 Relocating PCI address 3f7fe800 -> 17fe800 map 0:13 to irq 18 map 0:16 to irq 23 Relocating PCI address 3f7fec00 -> 17fec00 map 0:22 to irq 17 map 0:23 to irq 16 Relocating PCI address 3f7ffc00 -> 17ffc00 PCI: Address space collision on region 0 of device IBM TR Auto LANstreamer PCI: Address space collision on region 1 of device IBM TR Auto LANstreamer PCI: Address space collision on region 6 of device IBM TR Auto LANstreamer PCI: Failed to allocate resource 0 for IBM TR Auto LANstreamer PCI: Failed to allocate resource 1 for IBM TR Auto LANstreamer PCI: Failed to allocate resource 6 for IBM TR Auto LANstreamer Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) Starting kswapd v1.7 Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: registered device at major 7 loop: enabling 8 loop devices Floppy drive(s): fd0 is 2.88M FDC 0 is a National Semiconductor PC87306 ncr53c8xx: at PCI bus 0, device 16, function 0 ncr53c8xx: 53c825a detected ncr53c825a-0: rev 0x13 on pci bus 0 device 16 function 0 irq 23 ncr53c825a-0: ID 7, Fast-10, Parity Checking ncr53c825a-0: on-chip RAM at 0x37dff000 ncr53c825a-0: restart (scsi reset). ncr53c825a-0: Downloading SCSI SCRIPTS. scsi0 : ncr53c8xx - version 3.3b scsi : 1 host. Vendor: IBM Model: CDRM00203 !K Rev: 8B08 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0 ncr53c825a-0-<6,0>: wide msgin: 1-2-3-1. ncr53c825a-0-<6,0>: wide: wide=1 chg=0. ncr53c825a-0-<6,0>: wide msgout: 8. ncr53c825a-0-<6,0>: sync msgin: 1-3-1-c-f. ncr53c825a-0-<6,0>: sync: per=25 scntl3=0x10 ofs=8 fak=0 chg=1. ncr53c825a-0-<6,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8) ncr53c825a-0-<6,0>: sync msgout: 1-3-1-19-8. Vendor: IBM Model: DORS-32160W !# Rev: WA3E Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 6, lun 0 ncr53c825a-0-<6,0>: tagged command queue depth set to 8 scsi : detected 1 SCSI cdrom 1 SCSI disk total. ncr53c825a-0-<3,0>: sync_msgout: 1-3-1-19-8. ncr53c825a-0-<3,0>: sync msgin: 1-3-1-19-8. ncr53c825a-0-<3,0>: sync: per=25 scntl3=0x10 ofs=8 fak=0 chg=0. ncr53c825a-0-<3,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8) Uniform CD-ROM driver Revision: 3.11 SCSI device sda: hdwr sector= 512 bytes. Sectors= 4226725 [2063 MB] [2.1 GB] Partition check: /dev/scsi/host0/bus0/target6/lun0: p1 p2 VFS: Insert root floppy disk to be loaded into RAM disk and press ENTER RAMDISK: Compressed image found at block 0 Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A PPP generic driver version 2.4.1 pcnet32_probe_pci: found device 0x001022.0x002000 ioaddr=0x17fe800 resource_flags=0x000101 eth0: PCnet/PCI II 79C970A at 0x17fe800,<6> 08<6> 00<6> 5a<6> f8<6> ce<6> 57<6>pcnet32: pcnet32_private lp=cba6e000 lp_dma_addr=0x8ba6e000 assigned IRQ 22. pcnet32.c:v1.25kf 26.9.1999 tsbogend@alpha.franken.de Macintosh non-volatile memory driver v1.0 mice: PS/2 mouse device common for all mice devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 kmem_create: Forcing size word alignment - nfs_fh VFS: Mounted root (ext2 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 260k init 20k pmac 4k chrp 4k openfirmware hello Yellow Dog install init version 1.2 starting mounting /proc filesystem... done opening /proc/cmdline... done checking command line arguments... unknown option 'console=ttyS0,9600'!done checkEXT2-fs warning: checktime reached, running e2fsck is recommended ing for NFS root filesystem...no trying to remount root filesystem read write... done checking for writeable /tmp... yes couldn't open /dev/tty4 for syslog -- still using /tmp/syslog running install... failed to open /dev/tty1failed. I can't recover from this. ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/