From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3A01E5B2.D0A3D000@iigi.net> Date: Thu, 02 Nov 2000 17:07:46 -0500 From: John Jones MIME-Version: 1.0 To: cal_erickson@mvista.com CC: LinuxPPC Mailing List Subject: Re: ld.so.1 References: <3A01AEB4.B49D209B@iigi.net> <3A01E424.7FDD26BC@mvista.com> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Ok, I tried copying the file from the /target/lib to the /lib of my system (making sure a file of same name did not exist). I also copied the ld.so.1 file to the same directory that my RPM's are located in, then tried to install again and no dice. :< It was worth a shot. -John Cal Erickson wrote: > John, > Try checking in /lib of the host system. Even though binutils > creates files for the target, it runs and requires host software > not target software. > > Cal > > John Jones wrote: > > > I am trying to install the rpm: hhl-ppc_8xx-binutils-2.10.0.12-1 and I > > am getting the error: > > > > ld.so.1 is needed by hhl-ppc_8xx-binutils > > > > I checked the .../target/lib and that file (link) is there. > > > > Anyone know what I should do? > > > > Thanks. > > > > -John > > > > -- > > > http://www.libranet.com/petition.html> > > > > -- > =========================================================================== > Cal Erickson MontaVista Software Inc. > Customer Support Engineer 490 Potrero Avenue > Phone (408) 328-0304 Sunnyvale CA 94085 > Fax (408) 328-9204 e-mail cal_erickson@mvista.com > Pager 877-566-2012 support 1-800-759-8888 pin 202-7489 > web http://www.mvista.com support e-mail: support@mvista.com > eCode: http://cal@work.com.ecode.com > =========================================================================== > -- ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/