From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3A0BFE46.A7366165@snmc.com> Date: Fri, 10 Nov 2000 07:55:18 -0600 From: Daris A Nevil MIME-Version: 1.0 To: john zhan CC: linuxppc-embedded@lists.linuxppc.org Subject: Re: GDB for host development platform References: <006001bf448c$4aee3aa0$57c809c0@fel> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: John, Sounds as though you did not connect to the target correctly. I have written a procedure we use to connect to a PPC target over ethernet. You can view this at: http://qslinux.org/docs/cross/gdb/index.html Hope this helps. Regards, Daris Nevil john zhan wrote: > > I have now successfully build GDB-4.18 for linux/ppc. > Both target and host are powerpc-linux. > When I was trying to run a executable in my target > hardware(8xx) with gdb(target for exec), > e.g. hello, > GDB said > " > Starting program: ./hello > Don't know how to run. Try "help target". > " > Questions: > 1. what's going on it? > 2. Does(Did) anyone do the same thing? > 3.The cross-debugger + target gdb server with a serial connection > is the unique choices? > 4. I wonder which is the best way to debug a linux/ppc application > on the embedded platform. > 5. What do you think a full host development environment > (including native comilper,debugger etc) in the embedded > system. > > thank for any response. > > regards. > john zhan. > -- Daris A Nevil Simple Network Magic Corporation 401 Kentucky Lane McKinney, TX 75069 214-793-7757 dnevil@snmc.com www.snmc.com quickstack.com qslinux.org ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/