From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3A625423.E0F6C9AC@vacuumgenesis.com> Date: Sun, 14 Jan 2001 17:36:35 -0800 From: Timothy Ritchey MIME-Version: 1.0 To: linuxppc-embedded@lists.linuxppc.org Subject: kswapd Oops Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: I am running the the linuxppc_2_4 snapshot from 01/13/01, booting using ppcboot on a custom 860T-based board with 64 MB of dram. I am getting periodic Oops like: Oops: kernel access of bad area, sig: 11 NIP: C002C044 XER: 00000140 LR: C002C024 SP: C3FA3F10 REGS: c3fa3e60 TRAP: 0300 [snip][snip][snip] Call backtrace: C015A354 C002C298 C0004E8C I can still access the shell though. the call backtrace indicates this is occuring during kswapd. I am trying to isolate the problem to figure out what needs fixing. Is this a potential MMU problem, or could it be a problem with the swap setup. I am not sure what needs to be done with regards to an initrd-based system with respect to swap. It doesn't seem to me that it should even BE swapping since there is no disk... :/ Any advice would be appreciated. Cheers, tim ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/