loaded at:     00005400 0001A220
relocated to:  00800000 00814E20
board data at: 03F78000 03F7EA0C
relocated to:  0080E314 00814D20
zimage at:     00010400 000F1A5D
relocated to:  00815000 008F665D
avail ram:     00400000 00800000

Linux/PPC load: console=ttyS0,9600 console=tty0 root=/dev/sda1
Uncompressing Linux...done.
Now booting the kernel
Total memory = 64MB; using 0kB for hash table (at 00000000)
Linux version 2.4.1-pre1 (alois@localhost) (gcc version 2.95.2 19991024 (release)) #6 Sun Jan 14 12:03:19 CET 2001
PReP architecture
Boot arguments: console=ttyS0,9600 console=tty0 root=/dev/sda1
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600 console=tty0 root=/dev/sda1
time_init: decrementer frequency = 16.663082 MHz
Console: colour VGA+ 80x25
Calibrating delay loop... 133.12 BogoMIPS
Memory: 61980k available (1448k kernel code, 696k data, 236k init, 0k highmem)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
Fixup IO res, dev: 0.2, res_start: ffffff0->8ffffff0
Fixup IO res, dev: 0.2, res_start: fffffec->8fffffec
Fixup IO res, dev: 0.2, res_start: fffffe0->8fffffe0
Fixup IO res, dev: 0.2, res_start: fffffdc->8fffffdc
Fixup IO res, dev: 0.2, res_start: fffffc0->8fffffc0
Fixup IO res, dev: 0.6, res_start: ffffe00->8ffffe00
Fixup mem res, dev: 0.6, res_start: 3bfffe00->fbfffe00
Fixup IO res, dev: 0.7, res_start: ffffd80->8ffffd80
Fixup mem res, dev: 0.7, res_start: 3bfff800->fbfff800
Fixup mem res, dev: 0.7, res_start: fffc0000->bffc0000
Fixup mem res, dev: 0.8, res_start: ffff8000->bfff8000
Setting PCI interrupts for a "Omaha (PowerStack II Pro3000)"
Relocating PCI address 8ffffff0 -> 1fffff0
Relocating PCI address 8fffffec -> 1ffffec
Relocating PCI address 8fffffe0 -> 1ffffe0
Relocating PCI address 8fffffdc -> 1ffffdc
Relocating PCI address 8fffffc0 -> 1ffffc0
Relocating PCI address 8ffffe00 -> 1fffe00
Relocating PCI address 8ffffd80 -> 1fffd80
PCI: Resource 01fffff0-01fffff7 (f=101, d=0, p=0)
PCI: Resource 01ffffec-01ffffef (f=10d, d=0, p=0)
PCI: Resource 01ffffe0-01ffffe7 (f=101, d=0, p=0)
PCI: Resource 01ffffdc-01ffffdf (f=10d, d=0, p=0)
PCI: Resource 01ffffc0-01ffffcf (f=101, d=0, p=0)
PCI: Resource 01fffe00-01fffeff (f=101, d=0, p=0)
PCI: Resource fbfffe00-fbfffeff (f=200, d=0, p=0)
PCI: Resource 01fffd80-01fffdff (f=101, d=0, p=0)
PCI: Resource fbfff800-fbfffbff (f=200, d=0, p=0)
  got res[10000000:10ffffff] for resource 0 of Cirrus Logic GD 5446
  got res[11000000:1103ffff] for resource 6 of Digital Equipment Corporation DECchip 21142/43
  got res[11040000:11047fff] for resource 6 of Cirrus Logic GD 5446
PCI enable device: (PCI device 1014:0037 (IBM))
  cmd reg 0x106
PCI enable device: (Intel Corporation 82378IB [SIO ISA Bridge])
  cmd reg 0xf
PCI enable device: (Symphony Labs SL82c105)
  cmd reg 0x5
PCI enable device: (Symbios Logic Inc. (formerly NCR) 53c810)
  cmd reg 0x7
PCI enable device: (Digital Equipment Corporation DECchip 21142/43)
  cmd reg 0x7
PCI enable device: (Cirrus Logic GD 5446)
  cmd reg 0x7
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: enabling 8 loop devices
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
W82C105: IDE controller on PCI bus 00 dev 10
W82C105: chipset revision 6
W82C105: 100% native mode on irq 14
    ide0: BM-DMA at 0x1ffffc0-0x1ffffc7, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x1ffffc8-0x1ffffcf, BIOS settings: hdc:pio, hdd:pio
hdc: MATSHITA CR-583, ATAPI CDROM drive
ide1 at 0x1ffffe0-0x1ffffe7,0x1ffffde on irq 14
hdc: request sense failure: status=0x51 { DriveReady SeekComplete Error }
hdc: request sense failure: error=0x24
hdc: request sense failure: status=0x51 { DriveReady SeekComplete Error }
hdc: request sense failure: error=0x24
Uniform CD-ROM driver Revision: 3.12
Floppy drive(s): fd0 is 2.88M
FDC 0 is a National Semiconductor PC87306
Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Linux Tulip driver version 0.9.13 (January 2, 2001)
eth0: Digital DS21143 Tulip rev 65 at 0x1fffd80, 00:48:54:12:09:26, IRQ 11.
eth0:  EEPROM default media type Autosense.
eth0:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
eth0:  MII transceiver #1 config 3000 status 7869 advertising 01e1.
PPP generic driver version 2.4.1
PPP Deflate Compression module registered
SCSI subsystem driver Revision: 1.00
ncr53c8xx: at PCI bus 0, device 6, function 0
ncr53c8xx: 53c810 detected 
ncr53c810-0: rev 0x2 on pci bus 0 device 6 function 0 irq 9
ncr53c810-0: ID 7, Fast-10, Parity Checking
CACHE TEST FAILED: script execution failed.
start=80391414, pc=80391420, end=80391440
CACHE INCORRECTLY CONFIGURED.
ncr53c810-0: detaching...
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Macintosh non-volatile memory driver v1.0
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
request_module[block-major-8]: Root fs not mounted
VFS: Cannot open root device "sda1" or 08:01
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 08:01
Rebooting in 180 seconds..~[dino].Connected.