From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3A64B297.8B23FDC0@talknet.de> Date: Tue, 16 Jan 2001 21:44:07 +0100 From: Alois Fertl MIME-Version: 1.0 To: LinuxppcDev Subject: ncr810 problem on powerstack Content-Type: multipart/mixed; boundary="------------2DECD1FE660AD27E829EC759" Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: This is a multi-part message in MIME format. --------------2DECD1FE660AD27E829EC759 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit I tried the recent 2.4.1-pre1 kernel on a powerstack but the ncr810 based SCSI code does not work. The driver complains about CACHE INCORRECTLY CONFIGURED. Anybody knows what this comes from. Attached if the full boot log of the system. Alois --------------2DECD1FE660AD27E829EC759 Content-Type: text/plain; charset=iso-8859-1; name="boot.log" Content-Disposition: inline; filename="boot.log" Content-Transfer-Encoding: quoted-printable loaded at: 00005400 0001A220 relocated to: 00800000 00814E20 board data at: 03F78000 03F7EA0C relocated to: 0080E314 00814D20 zimage at: 00010400 000F1A5D relocated to: 00815000 008F665D avail ram: 00400000 00800000 Linux/PPC load: console=3DttyS0,9600 console=3Dtty0 root=3D/dev/sda1 Uncompressing Linux...done. Now booting the kernel Total memory =3D 64MB; using 0kB for hash table (at 00000000) Linux version 2.4.1-pre1 (alois@localhost) (gcc version 2.95.2 19991024 (= release)) #6 Sun Jan 14 12:03:19 CET 2001 PReP architecture Boot arguments: console=3DttyS0,9600 console=3Dtty0 root=3D/dev/sda1 On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=3DttyS0,9600 console=3Dtty0 root=3D/dev/sda1= time_init: decrementer frequency =3D 16.663082 MHz Console: colour VGA+ 80x25 Calibrating delay loop... 133.12 BogoMIPS Memory: 61980k available (1448k kernel code, 696k data, 236k init, 0k hig= hmem) Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Fixup IO res, dev: 0.2, res_start: ffffff0->8ffffff0 Fixup IO res, dev: 0.2, res_start: fffffec->8fffffec Fixup IO res, dev: 0.2, res_start: fffffe0->8fffffe0 Fixup IO res, dev: 0.2, res_start: fffffdc->8fffffdc Fixup IO res, dev: 0.2, res_start: fffffc0->8fffffc0 Fixup IO res, dev: 0.6, res_start: ffffe00->8ffffe00 Fixup mem res, dev: 0.6, res_start: 3bfffe00->fbfffe00 Fixup IO res, dev: 0.7, res_start: ffffd80->8ffffd80 Fixup mem res, dev: 0.7, res_start: 3bfff800->fbfff800 Fixup mem res, dev: 0.7, res_start: fffc0000->bffc0000 Fixup mem res, dev: 0.8, res_start: ffff8000->bfff8000 Setting PCI interrupts for a "Omaha (PowerStack II Pro3000)" Relocating PCI address 8ffffff0 -> 1fffff0 Relocating PCI address 8fffffec -> 1ffffec Relocating PCI address 8fffffe0 -> 1ffffe0 Relocating PCI address 8fffffdc -> 1ffffdc Relocating PCI address 8fffffc0 -> 1ffffc0 Relocating PCI address 8ffffe00 -> 1fffe00 Relocating PCI address 8ffffd80 -> 1fffd80 PCI: Resource 01fffff0-01fffff7 (f=3D101, d=3D0, p=3D0) PCI: Resource 01ffffec-01ffffef (f=3D10d, d=3D0, p=3D0) PCI: Resource 01ffffe0-01ffffe7 (f=3D101, d=3D0, p=3D0) PCI: Resource 01ffffdc-01ffffdf (f=3D10d, d=3D0, p=3D0) PCI: Resource 01ffffc0-01ffffcf (f=3D101, d=3D0, p=3D0) PCI: Resource 01fffe00-01fffeff (f=3D101, d=3D0, p=3D0) PCI: Resource fbfffe00-fbfffeff (f=3D200, d=3D0, p=3D0) PCI: Resource 01fffd80-01fffdff (f=3D101, d=3D0, p=3D0) PCI: Resource fbfff800-fbfffbff (f=3D200, d=3D0, p=3D0) got res[10000000:10ffffff] for resource 0 of Cirrus Logic GD 5446 got res[11000000:1103ffff] for resource 6 of Digital Equipment Corporat= ion DECchip 21142/43 got res[11040000:11047fff] for resource 6 of Cirrus Logic GD 5446 PCI enable device: (PCI device 1014:0037 (IBM)) cmd reg 0x106 PCI enable device: (Intel Corporation 82378IB [SIO ISA Bridge]) cmd reg 0xf PCI enable device: (Symphony Labs SL82c105) cmd reg 0x5 PCI enable device: (Symbios Logic Inc. (formerly NCR) 53c810) cmd reg 0x7 PCI enable device: (Digital Equipment Corporation DECchip 21142/43) cmd reg 0x7 PCI enable device: (Cirrus Logic GD 5446) cmd reg 0x7 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: enabling 8 loop devices Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx W82C105: IDE controller on PCI bus 00 dev 10 W82C105: chipset revision 6 W82C105: 100% native mode on irq 14 ide0: BM-DMA at 0x1ffffc0-0x1ffffc7, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1ffffc8-0x1ffffcf, BIOS settings: hdc:pio, hdd:pio hdc: MATSHITA CR-583, ATAPI CDROM drive ide1 at 0x1ffffe0-0x1ffffe7,0x1ffffde on irq 14 hdc: request sense failure: status=3D0x51 { DriveReady SeekComplete Error= } hdc: request sense failure: error=3D0x24 hdc: request sense failure: status=3D0x51 { DriveReady SeekComplete Error= } hdc: request sense failure: error=3D0x24 Uniform CD-ROM driver Revision: 3.12 Floppy drive(s): fd0 is 2.88M FDC 0 is a National Semiconductor PC87306 Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_= PCI enabled ttyS00 at 0x03f8 (irq =3D 4) is a 16550A ttyS01 at 0x02f8 (irq =3D 3) is a 16550A Linux Tulip driver version 0.9.13 (January 2, 2001) eth0: Digital DS21143 Tulip rev 65 at 0x1fffd80, 00:48:54:12:09:26, IRQ 1= 1. eth0: EEPROM default media type Autosense. eth0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.= eth0: MII transceiver #1 config 3000 status 7869 advertising 01e1. PPP generic driver version 2.4.1 PPP Deflate Compression module registered SCSI subsystem driver Revision: 1.00 ncr53c8xx: at PCI bus 0, device 6, function 0 ncr53c8xx: 53c810 detected = ncr53c810-0: rev 0x2 on pci bus 0 device 6 function 0 irq 9 ncr53c810-0: ID 7, Fast-10, Parity Checking CACHE TEST FAILED: script execution failed. start=3D80391414, pc=3D80391420, end=3D80391440 CACHE INCORRECTLY CONFIGURED. ncr53c810-0: detaching... scsi0 : SCSI host adapter emulation for IDE ATAPI devices Macintosh non-volatile memory driver v1.0 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. request_module[block-major-8]: Root fs not mounted VFS: Cannot open root device "sda1" or 08:01 Please append a correct "root=3D" boot option Kernel panic: VFS: Unable to mount root fs on 08:01 Rebooting in 180 seconds..~[dino].=07Connected. --------------2DECD1FE660AD27E829EC759-- ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/