From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Thu, 08 Feb 2001 18:59:13 +0100 From: Vincent Favre-Nicolin Subject: Re: MESH not found with 2.4.1 on 7500 To: linuxppc-dev@lists.linuxppc.org Message-id: <3A82DE71.AC266A31@cryst.unige.ch> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: I don't know if that's related, but I have a 7300 and also had some problem with the internal SCSI. The internal bus can do 10 Mo/s, so in 2.2 kernels I always used this value instead of the default 5 Mo/s. Now when I tried to use 2.4, I could not boot with the same modification. The SCSI is well recognized (I don't have the dmesg here), but when trying to read the disk it stopped by saying something like /dev/sdb: READ capacity failed. I never had this with 2.2, and 2.4 with the default max speed of 5 Mo/s works fine. Note that I mostly use another disk on an UW Formac card, so it's not important to me. -- Vincent Favre-Nicolin http://www.unige.ch/crystal/favrev/ Laboratoire de Cristallographie Phone: +41 (22) 702 60 79 24 quai Ernest-Ansermet CH-1211 Geneva 4, Switzerland Fax: +41 (22) 702 61 08 ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/