From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3A9EB4FA.6B8D956E@snmc.com> Date: Thu, 01 Mar 2001 14:45:46 -0600 From: Daris A Nevil MIME-Version: 1.0 To: Peter Uttley Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: How can I slim down libc References: <000001c0a273$b7765c20$74dee783@lboro.ac.uk> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Pete, You may want to look at the QSLinux kernel at http://qslinux.org and ftp://qslinux.org. We have integrated the e2fs-compr Extended-2 Filesystem into the kernel. We can fit the Libc, Libdll, and two or three other libs, plus the executables for bash, ftp, telnet, and snmp into 3Meg of FLASH compressed, and still have room left over. Regards, Daris Nevil Peter Uttley wrote: > > Hope someone can point me in the right direction. > > I'm currently developing an embedded system based on an MPC-850, and > everything going quite well, however I'm currently mounting my file system > on NFS and now want to run from a ram disk. > Unfortunately I only have 8MB of RAM to play with and Libc on it's own is > 4MB, I've tried removing debug information but this doesn't get me down much > further. > > Any help on this matter would be highly appreciated, > > Regards, > > Pete. > -- Daris A Nevil Simple Network Magic Corporation 401 Kentucky Lane McKinney, TX 75069 214-793-7757 dnevil@snmc.com www.snmc.com quickstack.com qslinux.org ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/