How to enable 2 ethernet ports ??

linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed

* How to enable 2 ethernet ports ??
@ 2001-03-01 21:40 Arturo Nunez
  2001-03-01 21:47 ` Dan Malek
  0 siblings, 1 reply; 2+ messages in thread
From: Arturo Nunez @ 2001-03-01 21:40 UTC (permalink / raw)
  To: ppc


Hello:
	I have the following board:
	RPX CLLF
	Cpu:XPC860TZ
	Part Number:cllf60tzb16eb1nabw

	These Board has 2 ports:
	10 and 100 mbps
	I have a questions about these board:
	- How to compile the kernel in orther to have both ports
	recognized ??

	Regards

	Arturo Nunez


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: How to enable 2 ethernet ports ??
  2001-03-01 21:40 How to enable 2 ethernet ports ?? Arturo Nunez
@ 2001-03-01 21:47 ` Dan Malek
  0 siblings, 0 replies; 2+ messages in thread
From: Dan Malek @ 2001-03-01 21:47 UTC (permalink / raw)
  To: Arturo Nunez; +Cc: ppc

Arturo Nunez wrote:

>         These Board has 2 ports:
>         10 and 100 mbps

The 10 Mbit port is SCC1, the 10/100 is FEC.  Just select them
in the configuration process.

	-- Dan

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2001-03-01 21:47 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-03-01 21:40 How to enable 2 ethernet ports ?? Arturo Nunez
2001-03-01 21:47 ` Dan Malek

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).