From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3AA621D3.755358F7@iiic.ethz.ch> Date: Wed, 07 Mar 2001 12:56:03 +0100 From: Michel =?iso-8859-1?Q?D=E4nzer?= MIME-Version: 1.0 To: Henry Worth Cc: linuxppc-dev@lists.linuxppc.org Subject: Re: Pismo Aty128fb problem in 2.4.3-pre*? References: <3AA41B77.73470672@ncal.verio.com> <3AA5113F.A0B78521@ncal.verio.com> Content-Type: text/plain; charset=iso-8859-1 Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Henry Worth wrote: > > Narrowed down the problem a bit more. Specifying > "video=aty128fb:mode:17" works; also without the mode. > But, adding a depth parm (8,16,24, or 32) causes the > fb init failure. It defaults to 8 and fbset works for > 8,15,16,32 but 24 causes a blurry image. The last is - *tadda* - an endianness error. aty128fb incorrectly enables byte swapping for 24 bit, which can easily be fixed; look for CONFIG_CNTL . -- Earthling Michel Dänzer (MrCooper) \ Debian GNU/Linux (powerpc) developer CS student, Free Software enthusiast \ XFree86 and DRI project member ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/