* shell prompt cannot appear after "Freeing unused kernel memory:..."
@ 2001-03-18 5:50 michael
2001-03-20 0:18 ` Amit D Chaudhary
0 siblings, 1 reply; 3+ messages in thread
From: michael @ 2001-03-18 5:50 UTC (permalink / raw)
To: Dan Malek; +Cc: linuxppc-embedded
Hello:
I use ppcboot and can boot kernel with NFS filesystems on my custom
board now. But problem occurs ...
When it shows the following:
####################################
...........................
"VFS:Mounted root(nfs filesystem)".
Freeing unused kernel memory:44k init
####################################
At this moment I should have seen "sash#" ,but nothing happens . I cannot
see anything.
I remember that there is a patch for this when I boot kernel on my 860 based
custom board last year(linux-2.2.13+860).
I don't know if this can work for my 8260 based custom board
now(linux-2.4.1+8260).
Can you help me?
Thank you very much.
michael
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: shell prompt cannot appear after "Freeing unused kernel memory:..."
2001-03-18 5:50 shell prompt cannot appear after "Freeing unused kernel memory:..." michael
@ 2001-03-20 0:18 ` Amit D Chaudhary
2001-03-20 1:50 ` dony
0 siblings, 1 reply; 3+ messages in thread
From: Amit D Chaudhary @ 2001-03-20 0:18 UTC (permalink / raw)
To: michael; +Cc: Dan Malek, linuxppc-embedded
Hi,
Is your nfs rootfs correct? Check for /sbin/init, /etc/inittab, etc
Amit
michael wrote:
> Hello:
> I use ppcboot and can boot kernel with NFS filesystems on my custom
> board now. But problem occurs ...
> When it shows the following:
> ####################################
> ...........................
> "VFS:Mounted root(nfs filesystem)".
> Freeing unused kernel memory:44k init
> ####################################
>
> At this moment I should have seen "sash#" ,but nothing happens . I cannot
> see anything.
>
> I remember that there is a patch for this when I boot kernel on my 860 based
> custom board last year(linux-2.2.13+860).
> I don't know if this can work for my 8260 based custom board
> now(linux-2.4.1+8260).
> Can you help me?
>
> Thank you very much.
>
> michael
>
>
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: shell prompt cannot appear after "Freeing unused kernel memory:..."
2001-03-20 0:18 ` Amit D Chaudhary
@ 2001-03-20 1:50 ` dony
0 siblings, 0 replies; 3+ messages in thread
From: dony @ 2001-03-20 1:50 UTC (permalink / raw)
To: Amit D Chaudhary; +Cc: Dan Malek, linuxppc-embedded
> Is your nfs rootfs correct? Check for /sbin/init, /etc/inittab, etc
Yes, they are OK. I only use sash as my shell .
The same rootfs can work on linux2.2.13+860 .
Any ideas?
machael
>
> michael wrote:
>
> > Hello:
> > I use ppcboot and can boot kernel with NFS filesystems on my custom
> > board now. But problem occurs ...
> > When it shows the following:
> > ####################################
> > ...........................
> > "VFS:Mounted root(nfs filesystem)".
> > Freeing unused kernel memory:44k init
> > ####################################
> >
> > At this moment I should have seen "sash#" ,but nothing happens . I
cannot
> > see anything.
> >
> > I remember that there is a patch for this when I boot kernel on my 860
based
> > custom board last year(linux-2.2.13+860).
> > I don't know if this can work for my 8260 based custom board
> > now(linux-2.4.1+8260).
> > Can you help me?
> >
> > Thank you very much.
> >
> > michael
> >
> >
>
>
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2001-03-20 1:50 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-03-18 5:50 shell prompt cannot appear after "Freeing unused kernel memory:..." michael
2001-03-20 0:18 ` Amit D Chaudhary
2001-03-20 1:50 ` dony
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).