From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <3AC49C61.D3B65EDE@snmc.com> Date: Fri, 30 Mar 2001 08:46:57 -0600 From: Daris A Nevil MIME-Version: 1.0 To: simitel0299 Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: Where get the Linux Init Source for 8xx References: <20010330062136.3295.qmail@sina.com> Content-Type: text/plain; charset=iso-8859-1 Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Wtao, You can also find CPU PWRUP code for the MPC850 in the QSLinux release, downloadable from ftp://qslinux.org. It contains code to "kick" the watchdog as it decompresses the kernel. It also provides a very flexible scheme for configuring processor clock speed, console port setup, etc. Documentation can be found at http://qslinux.org. Regards, Daris Nevil SNMC simitel0299 wrote: > > Hello, all: > Would you like to provide me with the source codes of LinuxPPC initialization for MPC8xx, just from the CPU PWRUP Reset to the OS and finally to the Application ? If available, the corresponding documents will be OK! > Thank you for your help! > Best Regards! > Wtao > 2001/3/30 > > ______________________________________ > > =================================================================== > 新浪免费电子邮箱 (http://mail.sina.com.cn) > 网里寻她千百度!没有"聊友速配",怎能"成双成对"? (http://newchat.sina.com.cn) > -- Daris A Nevil Simple Network Magic Corporation 401 Kentucky Lane McKinney, TX 75069 214-793-7757 dnevil@snmc.com www.snmc.com quickstack.com qslinux.org ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/