From: Bryan Rittmeyer <bryan@ixiacom.com>
To: linuxppc-embedded@lists.linuxppc.org
Subject: bootloader for deeply embedded 405CR
Date: Sat, 07 Apr 2001 13:09:12 -0700 [thread overview]
Message-ID: <3ACF73E8.24CAACE4@ixiacom.com> (raw)
Hello linuxppc-embedded,
I am attempting to boot Montavista's PPC405 Linux port on
a very minimal 405CR Rev C target: essentially, there's 64MB
of SDRAM and a minicom on UART0. I have a 405GP kernel
loading great on the Walnut board using the IBM serial
monitor and treeboot, but I'm unsure what I need to do
on the CR before I can begin successfully running Linux on it.
I am using an Abatron BDI2000 along with GDB to load code and
tweak registers on the target.
Right now, I am configuring the SDRAM controller and UART0,
but apparently that is not sufficient to fully boot Linux,
since I never get any output on the serial port except for
the 'a' debug printout I enabled in head_4xx.S
Does anyone have a minimal 405GP/CR bootloader that I
could use as an example? Or perhaps a FAQ on how to bring
up a deeply embedded 405 using the Abatron box?
Thanks,
Bryan Rittmeyer
--
Bryan Rittmeyer
mailto:bryan@ixiacom.com
Ixia Communications
26601 W. Agoura Rd.
Calabasas, CA 91302
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next reply other threads:[~2001-04-07 20:09 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-04-07 20:09 Bryan Rittmeyer [this message]
2001-04-07 20:50 ` bootloader for deeply embedded 405CR Wolfgang Denk
2001-04-09 7:08 ` AW: " Stefan Roese
[not found] <20010407220120.85706281E2@denx.denx.de>
2001-04-10 20:44 ` Bryan Rittmeyer
2001-04-10 21:16 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3ACF73E8.24CAACE4@ixiacom.com \
--to=bryan@ixiacom.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).