From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <3AD370AA.93F59622@ixiacom.com> Date: Tue, 10 Apr 2001 13:44:26 -0700 From: Bryan Rittmeyer MIME-Version: 1.0 To: Wolfgang Denk , linuxppc-embedded@lists.linuxppc.org Subject: Re: bootloader for deeply embedded 405CR References: <20010407220120.85706281E2@denx.denx.de> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Wolfgang Denk wrote: > For the Walnut it should be a simple thing to do: > > make WALNUT405_config > make Hello Wolfgang, I have built a CVS ppcboot as you suggest, however it appears to expect being burned into flash memory. What I would like to do is GDB-load an ELF ppcboot into the Walnut's 32MB SDRAM mapped at address 0, then execute it in place. Then I want to GDB load a kernel at another higher address, and use ppcboot to boot it. Is this already possible or will I have to modify Makefiles, linker scripts, and possibly code? Regards, Bryan -- Bryan Rittmeyer mailto:bryan@ixiacom.com Ixia Communications 26601 W. Agoura Rd. Calabasas, CA 91302 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/