From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3AFAC193.F7B1FE96@mvista.com> Date: Thu, 10 May 2001 12:28:03 -0400 From: Dan Malek MIME-Version: 1.0 To: mschmid@ascona.de Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: Is CONFIG_8xx the right setting for MPC8240 References: Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: mschmid@ascona.de wrote: > Is it wrong to select CONFIG_8xx for a MPC8240 CPU ? Yes, it is..... > I know that the sandpoint board or one of them also uses a MPC8240 but i > don't know if CONFIG_8xx is used for that sandpoint board. The 8240 is a CHRP/60x configuration. Just select a 60x processor, configure PCI, and your board peripherals. Use the Sandpoint setup as an example for your board configuration. Any 8240 board should be running Linux in just a couple of hours......... -- Dan ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/