From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3B341B5B.2090301@mvista.com> Date: Fri, 22 Jun 2001 21:30:19 -0700 From: Matthew Locke MIME-Version: 1.0 To: yooth@ipone.co.kr Cc: linuxppc-embedded Subject: Re: Starting usb in RPXlite(mpx850) board References: Content-Type: text/plain; charset=us-ascii; format=flowed Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Yoo. Jonghoon wrote: > I'm using Montavista Hardhat linux 2.0(kernel 2.4.3) on > RPXlite board(mpx850). It uses Brad's HCI driver > (m8xxhci.c) > > At first, hci driver does not wanted to be initialized. I looked > inside source codes and found that > m8xxhci_start_controller returns error if partnum of cpu is > not m823. So I skipped partnum checking routine and then > hci drvier initialized. Is there any problem to do this ? uh, I believe so. If I remember correctly, USB is only supported on the 823 rpxlite DW. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/