From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3B3A0E58.7E41C368@mvista.com> Date: Wed, 27 Jun 2001 09:48:24 -0700 From: "Mark A. Greer" MIME-Version: 1.0 To: Neil Wilson Cc: "'linuxppc-embedded@lists.linuxppc.org'" Subject: Re: Sandpoint 3 + MPC7450 + HHL2 References: Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Neil Wilson wrote: > Hi, > > I managed to get the JourneyMan 2 82XX booting up on my Sandpoint3 MPC7450 - > after adding a enable for the TimeBase - however when a ramdisk is mounted > up I get very slow serial response, like several seconds to print a string, > does anyone have some ideas of what I could look at to resolve this, I have > an Abatron bdi etc but a lot of this is new to me so any help would be very > welcome. Thanks. I'll virtually guarantee you that its an interrupt-related problem. Either the routing is wrong or the IRQ isn't enabled or... Mark ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/