From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3B3B659F.ADE63ED0@mvista.com> Date: Thu, 28 Jun 2001 10:13:03 -0700 From: "Mark A. Greer" MIME-Version: 1.0 To: Neil Wilson , "'linuxppc-embedded@lists.linuxppc.org'" Subject: Re: Sandpoint 3 + MPC7450 + HHL2 References: <3B3B634F.E6B9FBFC@mvista.com> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: BTW, what tree are you basing your code off of? -- "Mark A. Greer" wrote: > Neil Wilson wrote: > > > Got it working now.... > > > > Not sure if these fixes are just Sandpoint3 or MPC7450 or the combination, > > but... > > > > 1) The openpic_init call in sandpoint_init_IRQ needs the offset argument to > > get the SIO int setup. > > Are you sure you want to do this??? The intsenses stuff in sandpoint_setup.c > is the way it is for a very good reason. Can you send me your patch so I can > take a look? Also, can you send the switch settings that you are using. > > > 2) I also needed to add a enable of the TBEN in HID0 (bit 0x04000000) just > > to get the kernel to think about booting at all - I put this in the > > decompress_kernel function. > > I think that your sandpoint-specific boot head.S or somewhere else like that > would be a much better choice than the ppc-generic decompress_kernel routine. > > > Do these sort of changes need pushing into the source tree ?, and if so > > would anyone care to explain how a newcommer does this, thanks. > > Let's hold off on this until people who have sandpoints can take a look. > > Mark > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/