From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3B3C38D9.2519DA96@mvista.com> Date: Fri, 29 Jun 2001 04:14:17 -0400 From: Dan Malek MIME-Version: 1.0 To: Neil Wilson Cc: "'linuxppc-embedded@lists.linuxppc.org'" Subject: Re: Sandpoint 3 + MPC7450 + HHL2 References: Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Neil Wilson wrote: > I managed to get the JourneyMan 2 82XX booting up on my Sandpoint3 MPC7450 - I'm sitting on a bunch of changes for both Sandpoint X3 and 7450. With the new cputable stuff in 2.4_devel, I'll stuff the 7450 changes in there. The X3 changes are a big hack to OpenPIC, because the X3 uses the serial interrupt interface of the EPIC. I'm still working with Motorola to understand some discrepancies in the way the board is supposed to work, and the way it does. That is, I have some additional hacks that make the board work, but it isn't right. I'll work on all of this over the weekend. > ...after adding a enable for the TimeBase So, you have an old version of DINK. Get it updated as you are probably missing more than that. I don't know what Motorola is shipping to their customers. I have had many revisions of hardware and silicon, and just recently have the L2 cache working. I never received a board with a working L3 cache. I guess there are some magic parts required, and they are ending up in the hands of people more important than me :-). -- Dan ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/