* mpc860 with dual ethernets
@ 2001-06-28 22:12 Joakim Tjernlund
2001-06-29 5:34 ` SangTae Ha
2001-06-29 8:36 ` Dan Malek
0 siblings, 2 replies; 7+ messages in thread
From: Joakim Tjernlund @ 2001-06-28 22:12 UTC (permalink / raw)
To: linuxppc-embedded
Hi all
I need 2 Ethernet network i/f's(SCC1 and SCC2). Looking into
enet.c is seems that this driver can only support one Ethernet SCC
at a time. Is there a version of enet.c that can support both
SCC1 and SCC2 simultaneously?
Joakim
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: mpc860 with dual ethernets
2001-06-28 22:12 mpc860 with dual ethernets Joakim Tjernlund
@ 2001-06-29 5:34 ` SangTae Ha
2001-06-29 8:36 ` Dan Malek
1 sibling, 0 replies; 7+ messages in thread
From: SangTae Ha @ 2001-06-29 5:34 UTC (permalink / raw)
To: Joakim Tjernlund; +Cc: linuxppc-embedded
What kind of board are you using? The enet.c and fec.c are enough to handle all possible SCC configurations.
Do you want to SCC1 and SCC2 or SCC1 and FEC(Fast Ethernet Controller)? It's not difficult to use all SCCs as you intended. I have some patches which can be a good reference to do it. Plase contact to me personally.
Redgards,
SangTae Ha
----- Original Message -----
From: "Joakim Tjernlund" <Joakim.Tjernlund@lumentis.se>
To: <linuxppc-embedded@lists.linuxppc.org>
Sent: Friday, June 29, 2001 7:12 AM
Subject: mpc860 with dual ethernets
>
> Hi all
>
> I need 2 Ethernet network i/f's(SCC1 and SCC2). Looking into
> enet.c is seems that this driver can only support one Ethernet SCC
> at a time. Is there a version of enet.c that can support both
> SCC1 and SCC2 simultaneously?
>
> Joakim
>
>
>
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: mpc860 with dual ethernets
2001-06-28 22:12 mpc860 with dual ethernets Joakim Tjernlund
2001-06-29 5:34 ` SangTae Ha
@ 2001-06-29 8:36 ` Dan Malek
2001-06-29 8:54 ` SangTae Ha
1 sibling, 1 reply; 7+ messages in thread
From: Dan Malek @ 2001-06-29 8:36 UTC (permalink / raw)
To: Joakim Tjernlund; +Cc: linuxppc-embedded
Joakim Tjernlund wrote:
> ... Is there a version of enet.c that can support both
> SCC1 and SCC2 simultaneously?
Yes, I have the patches. I'm travelling and will post them in
a day or so.
-- Dan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: mpc860 with dual ethernets
2001-06-29 8:36 ` Dan Malek
@ 2001-06-29 8:54 ` SangTae Ha
2001-07-01 4:59 ` Dan Malek
0 siblings, 1 reply; 7+ messages in thread
From: SangTae Ha @ 2001-06-29 8:54 UTC (permalink / raw)
To: Dan Malek; +Cc: linuxppc-embedded
You support SCC1 and SCC2 only inside the enet.c file? . I had made a file like enet2.c enet3.c something like that. I thought that a SCCx could be one ethernet or other device as well. Could you let me know if you have any comments about it?
Regards,
SangTae Ha
----- Original Message -----
From: "Dan Malek" <dan@mvista.com>
To: "Joakim Tjernlund" <Joakim.Tjernlund@lumentis.se>
Cc: <linuxppc-embedded@lists.linuxppc.org>
Sent: Friday, June 29, 2001 5:36 PM
Subject: Re: mpc860 with dual ethernets
>
> Joakim Tjernlund wrote:
>
> > ... Is there a version of enet.c that can support both
> > SCC1 and SCC2 simultaneously?
>
> Yes, I have the patches. I'm travelling and will post them in
> a day or so.
>
>
> -- Dan
>
>
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: mpc860 with dual ethernets
@ 2001-06-29 13:50 Subodh Nijsure
2001-08-02 10:35 ` Joakim Tjernlund
0 siblings, 1 reply; 7+ messages in thread
From: Subodh Nijsure @ 2001-06-29 13:50 UTC (permalink / raw)
To: 'Dan Malek ', 'Joakim Tjernlund '
Cc: 'linuxppc-embedded@lists.linuxppc.org '
Hello,
Is there any "notification" mailing list that one can subscribe to, in order
to
keep track of all patches going into 2_5 PPC branch? In case someone is
interested
in back porting some specific code to older version..
/Subodh
-----Original Message-----
From: Dan Malek
To: Joakim Tjernlund
Cc: linuxppc-embedded@lists.linuxppc.org
Sent: 6/29/01 1:36 AM
Subject: Re: mpc860 with dual ethernets
Joakim Tjernlund wrote:
> ... Is there a version of enet.c that can support both
> SCC1 and SCC2 simultaneously?
Yes, I have the patches. I'm travelling and will post them in
a day or so.
-- Dan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: mpc860 with dual ethernets
2001-06-29 13:50 Subodh Nijsure
@ 2001-08-02 10:35 ` Joakim Tjernlund
0 siblings, 0 replies; 7+ messages in thread
From: Joakim Tjernlund @ 2001-08-02 10:35 UTC (permalink / raw)
To: linuxppc-embedded
Hi!
Anybody got the patches Dan Malek referees to for dual Ethernets on
a mpc860? If yes, please send me a copy!
Dan seems to be too busy(or at holiday?) at the moment.
Joakim
> From: Dan Malek
> To: Joakim Tjernlund
> Cc: linuxppc-embedded@lists.linuxppc.org
> Sent: 6/29/01 1:36 AM
> Subject: Re: mpc860 with dual ethernets
>
>
> Joakim Tjernlund wrote:
>
> > ... Is there a version of enet.c that can support both
> > SCC1 and SCC2 simultaneously?
>
> Yes, I have the patches. I'm travelling and will post them in
> a day or so.
>
>
> -- Dan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2001-08-02 10:35 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-06-28 22:12 mpc860 with dual ethernets Joakim Tjernlund
2001-06-29 5:34 ` SangTae Ha
2001-06-29 8:36 ` Dan Malek
2001-06-29 8:54 ` SangTae Ha
2001-07-01 4:59 ` Dan Malek
-- strict thread matches above, loose matches on Subject: below --
2001-06-29 13:50 Subodh Nijsure
2001-08-02 10:35 ` Joakim Tjernlund
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).