From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3B49F097.DABAF972@mvista.com> Date: Mon, 09 Jul 2001 13:57:43 -0400 From: Dan Malek MIME-Version: 1.0 To: James F Dougherty Cc: linuxppc-embedded@lists.linuxppc.org, cort@cs.nmt.edu Subject: Re: ppc-linux EPIC (OpenPIC) and Interrupts on MPC8240 References: <200107062139.OAA14875@krakatoa.gigabitnetworks.com> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: James F Dougherty wrote: > The board is essentially a Motorola Sandpoint design variant, so > I have started with the MontaVista Sandpoint port of linux-2.3.1 What is linux-2.3.1? Which version of the Sandpoint? If it is the old Sandpoint X2, and you are using the EPIC with discrete interrups (IRQ0 - IRQ4) the latest MontaVista HHL 2.0 should be used (it should be used in any case). The code in the public BK trees should also match this release. If you are using a Sandpoint X3 with the serial mode interrupt EPIC, there are some patches I'll have to send you. -- Dan ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/