linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
* RE: gdb with 405 target
@ 2001-07-09 15:20 Wright, David
  2001-07-09 20:31 ` Frank Rowand
  0 siblings, 1 reply; 3+ messages in thread
From: Wright, David @ 2001-07-09 15:20 UTC (permalink / raw)
  To: Matthias Fuchs, linuxppc-embedded


We got a patch for this problem from MontaVista; once I fixed a
couple of bugs in the patch, it worked fine.  I supplied a report
to MontaVista about the bugs, but never got any mail back from
them, so I don't know what happened after that.

  -- David Wright




> -----Original Message-----
> From: Matthias Fuchs [mailto:matthias.fuchs@esd-electronics.com]
> Sent: Monday, July 09, 2001 11:01 AM
> To: linuxppc-embedded
> Subject: gdb with 405 target
>
>
>
> Hi,
>
> I got the following problem when I try to debug a sample
> program on one
> of our IBM405 targets.
> I read some earlier postings in this list that describe similar
> problems.
>
> So my question: Is this problem already fixed ? Where can I
> find a fix ?
>
> The kernel is build from the MontaVista 405 sources from beginning of
> march.
>
> sh-2.03# gdb /bin/demo
> GNU gdb 5.0
> Copyright 2000 Free Software Foundation, Inc.
> GDB is free software, covered by the GNU General Public
> License, and you
> are
> welcome to change it and/or distribute copies of it under certain
> conditions.
> Type "show copying" to see the conditions.
> There is absolutely no warranty for GDB.  Type "show warranty" for
> details.
> This GDB was configured as "powerpc-hardhat-linux"...
> (gdb) run
> Starting program: /bin/demo
>
> Program terminated with signal SIGTRAP, Trace/breakpoint trap.
> The program no longer exists.
> (gdb)
>
> Oops: Exception in kernel mode, sig: 5
> NIP: C0002D70 XER: 00000000 LR: C00028BC SP: C0997E80 REGS: c0997dd0
> TRAP: 2000
> MSR: 00009230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
> TASK = c0996000[33] 'demo' Last syscall: 6
> last math 00000000 last altivec 00000000
> GPR00: 00000001 C0997E80 C0996000 C0997E90 30002BC0 30000828 30000828
> 00000000
> GPR08: 300275C8 00000000 00000003 30026FF8 30026DC8 100A11E4 1009FDB0
> 00000000
> GPR16: 00000000 00000000 00000000 1004CA70 00009230 00997E80 00000000
> C00028BC
> GPR24: C0002D70 10000034 00000000 30026B54 00000000 30026B88 300262C0
> 7FFFFA50
> Call backtrace:
> C00028BC 30004704 3000DEE0 30003204 30003144 30010C8C
>
>
> Thanks for advice
> Matthias
> --
> -------------------------------------------------
> \ Matthias Fuchs                                 \
>  \ esd electronic system design Gmbh              \
>   \ Vahrenwalder Straße 205                        \
>    \ D-30165 Hannover                               \
>     \ email: matthias.fuchs@esd-electronics.com      \
>      \ phone: +49-511-37298-0                         \
>       \ fax:   +49-511-37298-68                        \
>        --------------------------------------------------
>
>
>

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

^ permalink raw reply	[flat|nested] 3+ messages in thread
* gdb with 405 target
@ 2001-07-09 15:00 Matthias Fuchs
  0 siblings, 0 replies; 3+ messages in thread
From: Matthias Fuchs @ 2001-07-09 15:00 UTC (permalink / raw)
  To: linuxppc-embedded


Hi,

I got the following problem when I try to debug a sample program on one
of our IBM405 targets.
I read some earlier postings in this list that describe similar
problems.

So my question: Is this problem already fixed ? Where can I find a fix ?

The kernel is build from the MontaVista 405 sources from beginning of
march.

sh-2.03# gdb /bin/demo
GNU gdb 5.0
Copyright 2000 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you
are
welcome to change it and/or distribute copies of it under certain
conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for
details.
This GDB was configured as "powerpc-hardhat-linux"...
(gdb) run
Starting program: /bin/demo

Program terminated with signal SIGTRAP, Trace/breakpoint trap.
The program no longer exists.
(gdb)

Oops: Exception in kernel mode, sig: 5
NIP: C0002D70 XER: 00000000 LR: C00028BC SP: C0997E80 REGS: c0997dd0
TRAP: 2000
MSR: 00009230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c0996000[33] 'demo' Last syscall: 6
last math 00000000 last altivec 00000000
GPR00: 00000001 C0997E80 C0996000 C0997E90 30002BC0 30000828 30000828
00000000
GPR08: 300275C8 00000000 00000003 30026FF8 30026DC8 100A11E4 1009FDB0
00000000
GPR16: 00000000 00000000 00000000 1004CA70 00009230 00997E80 00000000
C00028BC
GPR24: C0002D70 10000034 00000000 30026B54 00000000 30026B88 300262C0
7FFFFA50
Call backtrace:
C00028BC 30004704 3000DEE0 30003204 30003144 30010C8C


Thanks for advice
Matthias
--
-------------------------------------------------
\ Matthias Fuchs                                 \
 \ esd electronic system design Gmbh              \
  \ Vahrenwalder Straße 205                        \
   \ D-30165 Hannover                               \
    \ email: matthias.fuchs@esd-electronics.com      \
     \ phone: +49-511-37298-0                         \
      \ fax:   +49-511-37298-68                        \
       --------------------------------------------------

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2001-07-09 20:31 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-07-09 15:20 gdb with 405 target Wright, David
2001-07-09 20:31 ` Frank Rowand
  -- strict thread matches above, loose matches on Subject: below --
2001-07-09 15:00 Matthias Fuchs

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).