From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3B4CAB59.DA517FDC@mvista.com> Date: Wed, 11 Jul 2001 15:39:05 -0400 From: Dan Malek MIME-Version: 1.0 To: jonathan.hurley@ni.com Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: Booting HHL on Motorola Sandpoint X3 (with MPC 8245) References: Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: jonathan.hurley@ni.com wrote: > .... I believe there have been some minor changes in the > main board design between the X2 and X3, Ummm...if you look through the archives you will notice this has been discussed. They are more than "minor" changes, mostly due to the use of the serial interface to the EPIC. > ... Does HHL currently support the Sandpoint X3 system, and if not are > there any future plans to add support for the new platform? HHL would support the X3 if you purchased a subscription and specifically asked for that. I have the patches, they just won't work with the latest 2_4_devel tree and they aren't suitable as a generic addition. When I get the current tree to work properly for 4xx/8xx again, I'll make the updates for both the 7450 and the X3. I either have to convince the OpenPIC maintainers this is a good addition (which I don't even think it is) or find an alternative. -- Dan ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/