From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3B532093.4010004@mvista.com> Date: Mon, 16 Jul 2001 10:12:51 -0700 From: Matthew Locke MIME-Version: 1.0 To: Nguyen Trung Thanh Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: PCMCIA Nokia Cardphone 2.0 for MPC823 References: <3B52C152.F5FB58B7@genetel.co.kr> <000901c10df4$f1e85100$df0fa8c0@mystore> Content-Type: text/plain; charset=EUC-KR Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Nguyen Trung Thanh wrote: > Hi all, > > Pls help me, I'm stuck with this card. > Now I used kernel Powerpc Hardhat 2.2.14, > and pcmcia-cs-3.1.21 in a custom board using > MPC823. You should consider moving to 3.1.26, many bugs have been fixed. > > I could dial up with this card, but it is not stable, > and I could not transfer data such as ftp.... > > Furthermore, I must set the maximum value for > psst = 4, psht = 4, and psl = 20. > and add some delay between each time I read from serial port ( in function > receive_chars from file serial.c). In general, there are conflicts between 8xx serial driver (uart.c) and serial.c. They may be stepping on each other. > > Have anyone done it, before? Or you have any information about thi card > phone, pls give me. > > Does this card use 16550A, and follow the standard of this chip? > Is there any special thing about it spec, timing? > > Thanks very much, > Jari > > > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/