From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3B69C8D8.9EE9E343@mvista.com> Date: Thu, 02 Aug 2001 14:40:40 -0700 From: "Mark A. Greer" MIME-Version: 1.0 To: bhupinder sahran Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: pci-pci bridge initialisation code References: <20010802205437.5078.qmail@web3801.mail.yahoo.com> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: bhupinder sahran wrote: > hi all > i have ported linux on my MPC8240 processor. > but as i am not having bios kind of stuff so kernek > should initialise all the peripherals sitting on the > pci bus. > i have intigrated the code, but code for mapping the > pci-pci bridge is not with me. > so i cam not see the device which are sitting on bus > after the bridge. > can anybody tell me where i can get this code. > thanks in advance > with king regards I'm not sure I really understood everything you're trying to say but you can start looking in mpc10x_common.c for some mpc105/106//107/8240 bridge init code. You can look at the sandpoint port for how to use it. This code should do most if not all of what you need to do. Mark ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/