* (enet) - hardware address??
@ 2001-08-07 8:12 hychon
0 siblings, 0 replies; only message in thread
From: hychon @ 2001-08-07 8:12 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 620 bytes --]
I want to use to two ethernet device (fec and SCC1) base on MPC860T and
I use kernel-2.2.13.
when I am boot that , it come in to collision between devices.
boot message ================================
eth0: CPM ENET Version 0.2 on SCC1, 00:06:42:00:00:01
eth1: FEC ENET Version 0.1, fec: Phy @ 0x0, type 0x001378e1
00:fec: link up,auto complete
06:fec: 10 Mbps, Half-Duplex
42:00:00:01
IP-Config: Incomplete network configuration information.
dev_close: bug eth0 still running
===============================================================
how to allocate a hardware address (mac address) to each device in
kernel ?
[-- Attachment #2: Card for hychon --]
[-- Type: text/x-vcard, Size: 87 bytes --]
begin:vcard
n:;
x-mozilla-html:FALSE
adr:;;;;;;
version:2.1
x-mozilla-cpt:;0
end:vcard
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-08-07 8:12 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-08-07 8:12 (enet) - hardware address?? hychon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).