* how to dump other regs via abatron-bdi / gdb ?
@ 2001-08-27 21:18 Mark Pilon
2001-08-28 15:32 ` Scott Anderson
0 siblings, 1 reply; 2+ messages in thread
From: Mark Pilon @ 2001-08-27 21:18 UTC (permalink / raw)
To: linuxppc-embedded
I'm accustomed to printing general purpose registers: print $r0
and the like --
bringing up a board (before establishing an exception vector table)
I'm getting some unknown exception -- how do I print the ESR (and
other SPRs for that matter ) ??
I'm using montavista ppc_4xx-gdb -- GNU gdb 5.0 and abatron bdi/gdb:
BDI Type : BDI2000 (SN: 93170608)
Loader : V1.04
Firmware : V1.05 bdiGDB for PPC400
Logic : V1.01 PPC400
I suspect the problem is an incomplete bdi board config file,
but it'd help to be able to figure out what's missing ...
thanks,
Mark
--
Mark Pilon
Minolta-QMS
5661 Airport Blvd, Ste A.
Boulder, CO 80301
1-303-443-5505 ext. 326; fax: 303-443-7107
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: how to dump other regs via abatron-bdi / gdb ?
2001-08-27 21:18 how to dump other regs via abatron-bdi / gdb ? Mark Pilon
@ 2001-08-28 15:32 ` Scott Anderson
0 siblings, 0 replies; 2+ messages in thread
From: Scott Anderson @ 2001-08-28 15:32 UTC (permalink / raw)
To: Mark Pilon; +Cc: linuxppc-embedded
Mark Pilon wrote:
>
> I'm accustomed to printing general purpose registers: print $r0
> and the like --
>
> bringing up a board (before establishing an exception vector table)
> I'm getting some unknown exception -- how do I print the ESR (and
> other SPRs for that matter ) ??
If all is configured correctly, you can just do:
BDI>rd esr
esr : 0x00000000 0
If not, but you know the SPR number, you can just do:
BDI>rdspr 0x3d4
SPR 980 : 0x00000000 0
> I suspect the problem is an incomplete bdi board config file,
> but it'd help to be able to figure out what's missing ...
The BDI came with a file called reg405gp.def. This file contains the
mappings from names to spr/dcr numbers. Make sure it is in your tftp
directory and then make sure you have something like:
[REGS]
IDCR1 0x010 0x011 ;MEMCFGADR and MEMCFGDATA
IDCR2 0x012 0x013 ;EBCCFGADR and EBCCFGDATA
IDCR3 0x014 0x015 ;KIAR and KIDR
FILE reg405gp.def
in your config file. BOOT your BDI and you should then be set.
Scott Anderson
scott_anderson@mvista.com MontaVista Software Inc.
(408)328-9214 1237 East Arques Ave.
http://www.mvista.com Sunnyvale, CA 94085
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2001-08-28 15:32 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-08-27 21:18 how to dump other regs via abatron-bdi / gdb ? Mark Pilon
2001-08-28 15:32 ` Scott Anderson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).