From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3B969EDE.58143637@mvista.com> Date: Wed, 05 Sep 2001 14:53:34 -0700 From: Cal Erickson Reply-To: cal_erickson@mvista.com MIME-Version: 1.0 To: Navin Boppuri Cc: "Linuxppc-Embedded (E-mail)" Subject: Re: Ctrl-C does not work References: <3A494DE356A49A40B37442E1E0D9F3B506343E@ptah.ad.newisys.com> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Navin, Take a look at the /dev/console entry. In one it is a link to /dev/ttyS0 in the other it isn't. At one point it should have been the link. That is what makes it work. It was a feature that is a disguised bug. It was fixed in HHL 2.0 Cal Erickson Navin Boppuri wrote: > Hello everyone, > > Ctrl-C does on work on my serial console when I use the sample file > system from Hardhat 1.0 toolkit. It , however, works with the Hardhat > 1.2 toolkit sample file system. I am using the same kernel to test both > the file systems. What could be different between these two file > systems? > > Thank you, > Navin > -- =========================================================================== Cal Erickson MontaVista Software Inc. Linux Consultant 1237 E. Arques Ave. Phone (408) 328-0304 Sunnyvale CA 94085 Fax (408) 328-9204 web http://www.mvista.com =========================================================================== ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/