From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3BA21822.B39B3B0A@digigram.com> Date: Fri, 14 Sep 2001 16:45:54 +0200 From: Claire Troussier MIME-Version: 1.0 To: "linuxppc-embedded@lists.linuxppc.org" Subject: Problems with Sandpoint and IDE access Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Hi, I am using Montavista 2.4.2_hhl20 with a Sanpoint (8240) board and I am trying to add a hard disk on the IDE interface. I include the IDE driver in my kernel and I boot using an ethernet board. The driver seems to be correctly initialized but when I try to access the hard disk I always got the same error message sh-2.03# fdisk /dev/hda Unable to open /dev/hda sh-2.03# Any idea ? Thanks for your help. Claire Here are the boot messages Linux/PPC load: Uncompressing Linux...done. Now booting the kernel Total memory = 16MB; using 0kB for hash table (at 00000000) Linux version 2.4.2_hhl20 (claire@claire) (gcc version 2.95.2 19991030 (2.95.3 p rerelease/franzo)) #48 lun sep 10 16:41:47 CEST 2001 Motorola SPS Sandpoint Test Platform Sandpoint port (C) 2000, 2001 MontaVista Software, Inc. (source@mvista.com) On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: OpenPIC Version 1.2 (1 CPUs and 24 IRQ sources) at f7fd0000 time_init: decrementer frequency = 24.997563 MHz Calibrating delay loop... 166.29 BogoMIPS Memory: 14600k available (968k kernel code, 436k data, 72k init, 0k highmem) Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 1024 (order: 1, 8192 bytes) POSIX conformance testing by UNIFIX PCI: Probing PCI hardware CI: device 00:11.0 has unknown header type 7f, ignoring. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 pty: 256 Unix98 ptys configured block: queued sectors max/low 9637kB/3212kB, 64 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx W82C105: IDE controller on PCI bus 00 dev 59 W82C105: chipset revision 5 W82C105: 100% native mode on irq 17 ide0: BM-DMA at 0xbfffd0-0xbfffd7, BIOS settings: hda:pio, hdb:pio SL82C105 command word: 5 IDE timing: 00000909, resetting to PIO0 timing ide1: BM-DMA at 0xbfffd8-0xbfffdf, BIOS settings: hdc:pio, hdd:pio SL82C105 command word: 5 IDE timing: 000003e4, resetting to PIO0 timing Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI ena bled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A 8139too Fast Ethernet driver 0.9.13 loaded eth0: RealTek RTL8139 Fast Ethernet at 0xbfffff00, 00:50:fc:21:19:ca, IRQ 18 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 1024) Sending BOOTP requests.... OK IP-Config: Got BOOTP answer from 192.168.254.20, my address is 192.168.254.203 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Looking up port of RPC 100003/2 on 192.168.254.20 Looking up port of RPC 100005/2 on 192.168.254.20 VFS: Mounted root (nfs filesystem) readonly. Freeing unused kernel memory: 72k init 4k openfirmware INIT: version 2.77 booting INIT: Entering runlevel: 3 sh-2.03# sh-2.03# cat /proc/pci PCI devices found: Bus 0, device 0, function 0: Class 0600: PCI device 1057:0003 (rev 17). Master Capable. Latency=32. Prefetchable 32 bit memory at 0x0 [0xffffffff]. Non-prefetchable 32 bit memory at 0x0 [0xfff]. Bus 0, device 11, function 0: Class 0601: PCI device 10ad:0565 (rev 16). IRQ 17. Bus 0, device 11, function 1: Class 0101: PCI device 10ad:0105 (rev 5). IRQ 17. Master Capable. Latency=128. Min Gnt=2.Max Lat=40. I/O at 0xbffff8 [0xbfffff]. I/O at 0xbffff4 [0xbffff7]. I/O at 0xbfffe8 [0xbfffef]. I/O at 0xbfffe4 [0xbfffe7]. I/O at 0xbfffd0 [0xbfffdf]. I/O at 0xbfffc0 [0xbfffcf]. Bus 0, device 15, function 0: Class 0200: PCI device 10ec:8139 (rev 16). IRQ 18. Master Capable. Latency=128. Min Gnt=32.Max Lat=64. I/O at 0xbffe00 [0xbffeff]. Non-prefetchable 32 bit memory at 0xbfffff00 [0xbfffffff]. sh-2.03# sh-2.03# cat /proc/ioports 00000000-0000001f : dma1 00000020-0000003f : pic1 00000040-0000005f : timer 00000080-0000008f : dma page reg 000000a0-000000bf : pic2 000000c0-000000df : dma2 000002f8-000002ff : serial(auto) 000003f8-000003ff : serial(auto) 00bffe00-00bffeff : PCI device 10ec:8139 00bffe00-00bffeff : eth0 00bfffc0-00bfffcf : PCI device 10ad:0105 00bfffd0-00bfffdf : PCI device 10ad:0105 00bfffd0-00bfffd7 : ide0 00bfffd8-00bfffdf : ide1 00bfffe4-00bfffe7 : PCI device 10ad:0105 00bfffe8-00bfffef : PCI device 10ad:0105 00bffff4-00bffff7 : PCI device 10ad:0105 00bffff8-00bfffff : PCI device 10ad:0105 sh-2.03# sh-2.03# ls -l /dev/hda* brw-rw---- 1 root disk 3, 0 Sep 10 2001 /dev/hda brw-rw---- 1 root disk 3, 1 Sep 10 2001 /dev/hda1 brw-rw---- 1 root disk 3, 10 Sep 10 2001 /dev/hda10 brw-rw---- 1 root disk 3, 11 Sep 10 2001 /dev/hda11 brw-rw---- 1 root disk 3, 12 Sep 10 2001 /dev/hda12 brw-rw---- 1 root disk 3, 13 Sep 10 2001 /dev/hda13 brw-rw---- 1 root disk 3, 14 Sep 10 2001 /dev/hda14 brw-rw---- 1 root disk 3, 15 Sep 10 2001 /dev/hda15 brw-rw---- 1 root disk 3, 16 Sep 10 2001 /dev/hda16 brw-rw---- 1 root disk 3, 2 Sep 10 2001 /dev/hda2 brw-rw---- 1 root disk 3, 3 Sep 10 2001 /dev/hda3 brw-rw---- 1 root disk 3, 4 Sep 10 2001 /dev/hda4 brw-rw---- 1 root disk 3, 5 Sep 10 2001 /dev/hda5 brw-rw---- 1 root disk 3, 6 Sep 10 2001 /dev/hda6 brw-rw---- 1 root disk 3, 7 Sep 10 2001 /dev/hda7 brw-rw---- 1 root disk 3, 8 Sep 10 2001 /dev/hda8 brw-rw---- 1 root disk 3, 9 Sep 10 2001 /dev/hda9 sh-2.03# ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/