From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3BD04DAE.761CDE75@chinook.com> Date: Fri, 19 Oct 2001 11:58:38 -0400 From: Peter Desnoyers MIME-Version: 1.0 To: Geoff Wyche Cc: "'linuxppc-embedded@lists.linuxppc.org'" Subject: Re: MPC8xx + serial console on SCC References: <607BF0A2B4F3D411A09500508BC225427E8328@mailctx.datum.com> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: I'm using it too - SCC2 in particular. KGDB is broken. Basic I/O worked OK with almost no work (starting from HHL2.0) but modem control took some extra code. Geoff Wyche wrote: > > Is anyone here working on an 8xx based board and using an SCC for serial > console? > > I've been working on some patches for it, and would like to compare notes. > > The board I'm working with is a custom board that uses an 860T. The > particular difficulties I'm having are very much related to serial console > IO on an SCC. After following linuxppc-embedded for a while, it seems use > of SCCs for serial is in the minority of configurations out there. > > Comments? > > --Geoff > gwyche@datum.com > -- ..................................................................... Peter Desnoyers (781) 457-1165 pdesnoyers@chinook.com Chinook Communications (617) 661-1979 pjd@fred.cambridge.ma.us 100 Hayden Ave, Lexington MA 02421 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/