From: Dan Malek <dan@mvista.com>
To: Neil Wilson <NWILSON@Airspan.com>
Cc: "'linuxppc-embedded@lists.linuxppc.org'"
<linuxppc-embedded@lists.linuxppc.org>
Subject: Re: Sandpoint X3 + network
Date: Fri, 19 Oct 2001 22:30:21 -0400 [thread overview]
Message-ID: <3BD0E1BD.7927133@mvista.com> (raw)
In-Reply-To: E69FF45ADA3BD511A25900047623CC4F12AB2E@jupiter
Neil Wilson wrote:
> Whilst I am trying to look at this problem I was wondering if anyone else
> has seen similar or even better knows why & has a cure.
I have seen the problem for all too long and don't yet have a cure.
When speaking to folks at Motorola, it appears they are having more
success than I when the Sandpoint X3 is configured for legacy X2 mode.
If you can determine how to do that successfully (I found it easier to
use the default X3 mode than figure out the switches :-), build a kernel
for the X2 and see how it works.
Due to the pipeline differences in the 7450, I suspect there are some
sync's or eieio's missing, but I haven't had the time to finish all
of the 7450 work.
Thanks.
-- Dan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
prev parent reply other threads:[~2001-10-20 2:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-10-17 14:15 Sandpoint X3 + network Neil Wilson
2001-10-20 2:30 ` Dan Malek [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3BD0E1BD.7927133@mvista.com \
--to=dan@mvista.com \
--cc=NWILSON@Airspan.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).