From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <3C67AC2D.3050005@pacbell.net>
Date: Mon, 11 Feb 2002 11:34:05 +0000
From: Armin <akuster@pacbell.net>
MIME-Version: 1.0
To: Stefan Roese <stefan.roese@esd-electronics.com>
Cc: "David =?ISO-8859-15?Q?M=FCller?= (ELSOFT AG)" <d.mueller@elsoft.ch>,
	linuxppc-embedded <linuxppc-embedded@lists.linuxppc.org>
Subject: Re: [PATCH] Several patches against linuxppc_devel-2.4.18-pre9
References: <EFEAIMDCOOOHIEPHDNFJCELKDKAA.stefan.roese@esd-electronics.com>
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Sender: owner-linuxppc-embedded@lists.linuxppc.org
List-Id: <linuxppc-embedded@lists.linuxppc.org>


Stefan Roese wrote:
> Armin and David,
>
>
>>The ethernet changes look fine.  there was on other change regarding
>>resetting the EMAC. The ethernet part can go in as is our we can wait
>>until tomorrow when I send in that change + multi emac irq fix.
>>
>
> I checked the EMAC/PHY patch on our board (CPCI-405 with Intel LXT971), and
> the driver seems to start without problems without ethernet cable connected,
> when the EMAC soft-reset command is removed from the init routine.
>
> With the soft-reset in init still implemented, "fec_enet_mdio_read()"
> returns with timeout, waiting for transfer to complete. The next soft-reset
> in open leads to the same problem (timeout in mdio_read()), but doesn't lead
> to a kernel panik.
>
> So Armin, could you please remove the soft-reset from init (if nobody
> objects, of cause).
>
> Best regards,
> Stefan Roese
>
>
>
>
>

Stefan, David & Andrew,

Thanks

I will remove the EMAC soft-reset.

--armin


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/