linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
* monitor in mpc860fads
@ 2002-02-26  9:16 gao xiaoguo
  0 siblings, 0 replies; 3+ messages in thread
From: gao xiaoguo @ 2002-02-26  9:16 UTC (permalink / raw)
  To: linuxppc-embedded


hi,

now i have a mpc860fads board, maybe there is a debug monitor inside it.
but i dont know how to check it. i also dont know what i need on host end to communicate with the monitor. some guide book is appreciated.

I am newbie in this area, hope some expertise point out a way for me.

thanks


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

^ permalink raw reply	[flat|nested] 3+ messages in thread

* RE: monitor in mpc860fads
@ 2002-02-26 12:00 Borracini Evandro-R45188
  2002-02-26 13:21 ` Magnus Damm
  0 siblings, 1 reply; 3+ messages in thread
From: Borracini Evandro-R45188 @ 2002-02-26 12:00 UTC (permalink / raw)
  To: 'gao xiaoguo', linuxppc-embedded

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb2312", Size: 1003 bytes --]


Hi,

Fads boards don't have any native monitor. You need to flash one on your board.
If you intend to run Linux on your fads, I recommend you using ppcboot as bootloader.

You can find ppcboot at http://ppcboot.sourceforge.net
Also, take a look at the "Linux for PowerPC embedded Systems Howto" at http://penguinppc.org/embedded/howto/PowerPC-Embedded-HOWTO.html. That is a very good guide.

regards

Evandro

> -----Original Message-----
> From: gao xiaoguo [mailto:gaoxg@guoguang.com.cn]
> Sent: Terça-feira, 26 de Fevereiro de 2002 06:17
> To: linuxppc-embedded
> Subject: monitor in mpc860fads
>
>
>
> hi,
>
> now i have a mpc860fads board, maybe there is a debug monitor
> inside it.
> but i dont know how to check it. i also dont know what i need
> on host end to communicate with the monitor. some guide book
> is appreciated.
>
> I am newbie in this area, hope some expertise point out a way for me.
>
> thanks
>
>
>

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: monitor in mpc860fads
  2002-02-26 12:00 monitor in mpc860fads Borracini Evandro-R45188
@ 2002-02-26 13:21 ` Magnus Damm
  0 siblings, 0 replies; 3+ messages in thread
From: Magnus Damm @ 2002-02-26 13:21 UTC (permalink / raw)
  To: Borracini Evandro-R45188; +Cc: 'gao xiaoguo', linuxppc-embedded


> If you intend to run Linux on your fads, I recommend you using ppcboot as bootloader.

A more minimalistic approach would be Miniboot. =)

http://opensource.se/projects/miniboot

The FADS board is supported right out of the box.
Just make sure you use the right crystal.

You could then boot PPCBoot from Miniboot if you want network support,
etc.

/ magnus

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2002-02-26 13:21 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-02-26 12:00 monitor in mpc860fads Borracini Evandro-R45188
2002-02-26 13:21 ` Magnus Damm
  -- strict thread matches above, loose matches on Subject: below --
2002-02-26  9:16 gao xiaoguo

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).