From: "Mark A. Greer" <mgreer@mvista.com>
To: Tzahi Oved <tzahio@voltaire.com>
Cc: "'linuxppc-embedded@lists.linuxppc.org'"
<linuxppc-embedded@lists.linuxppc.org>
Subject: Re: ppcboot 1.1.4 & MPSC
Date: Fri, 01 Mar 2002 14:15:28 -0500 [thread overview]
Message-ID: <3C7FD350.F6FEC68F@mvista.com> (raw)
In-Reply-To: 20083A3BAEF9D211BDB600805F8B14F3010A15AB@NTSERVER
Where are you getting the source, linuxppc_2_4_devel or linux-galileo?
linux-galileo, I hope, because there is not mpsc driver in 2_4_devel.
Some gotcha:
1) you must change jumpers J42 & J43 to pins 2&3 for mpsc.
2) DINK will not put anything out the mpsc but will still run so you have to
wait some unknown amount of time before running your image (assuming you're
downloading with a bdi or something like that).
3) You have turned on the mpsc and turned off the 16550 in make config, right?
That's all I can think of right now?
Mark
--
Tzahi Oved wrote:
> Hi,
> I'm trying to work with the internal uart (MPSC) on the Galileo EVB64260
> board. When I set the definition CONFIG_MPSC in the EVB64260 config file
> (which supposed to set the terminal to work on the MPSC) I'm not getting any
> response on my console, do I need to configure anything else ?? any
> suggestions ?
>
> Thanks
>
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
prev parent reply other threads:[~2002-03-01 19:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-02-26 8:25 ppcboot 1.1.4 & MPSC Tzahi Oved
2002-02-26 13:18 ` Wolfgang Denk
2002-03-01 19:15 ` Mark A. Greer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3C7FD350.F6FEC68F@mvista.com \
--to=mgreer@mvista.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
--cc=tzahio@voltaire.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).