From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3C838533.6050603@pacbell.net> Date: Mon, 04 Mar 2002 14:31:15 +0000 From: Armin MIME-Version: 1.0 To: andrew may Cc: John Tyner , linuxppc-embedded@lists.linuxppc.org Subject: Re: [PATCH] ocp enet References: <3C7D0AB9.5070801@pacbell.net> <20020304131703.A15551@ecam.san.rr.com> Content-Type: text/plain; charset=us-ascii; format=flowed Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: andrew may wrote: > On Wed, Feb 27, 2002 at 04:35:05PM +0000, Armin wrote: > >>Thanks, >> >>I want to try in on a few boards I have before it goes in. >> >>--armin >> > > Have you gotten a chance to try it yet? The testing I have > done has not shown any problems and I have been able to test > just about all of the cases. Boards with/without the correct > pull-ups. Remove the correct phy-id from the table. Booting > without a link. > > Here is another patch that for the driver. It removes some > cut and paste code from the rx interupts and breaks the work > into rx_clean and rx_fill functions. rx_fill is also called from > open. > Yes I have. I added history info and sent it to Tom to check in. I will look into this patch and will try it after Tom gets done. armin ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/