* booting from flash
@ 2002-03-04 19:42 Steven Blakeslee
2002-03-04 19:54 ` Wolfgang Denk
2002-03-04 20:00 ` Dan Malek
0 siblings, 2 replies; 3+ messages in thread
From: Steven Blakeslee @ 2002-03-04 19:42 UTC (permalink / raw)
To: 'linuxppc-embedded@lists.linuxppc.org'
Is there a simple way to boot embedded linux from flash? I've been able to
easily compile and execute from RAM but when I try from flash the kernel can
not use the initrd and it panics.
Steven Blakeslee
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: booting from flash
2002-03-04 19:42 booting from flash Steven Blakeslee
@ 2002-03-04 19:54 ` Wolfgang Denk
2002-03-04 20:00 ` Dan Malek
1 sibling, 0 replies; 3+ messages in thread
From: Wolfgang Denk @ 2002-03-04 19:54 UTC (permalink / raw)
To: Steven Blakeslee; +Cc: 'linuxppc-embedded@lists.linuxppc.org'
In message <D73A25AA6E54D511AD74009027B1110F0F30E0@ORION> you wrote:
>
> Is there a simple way to boot embedded linux from flash? I've been able to
> easily compile and execute from RAM but when I try from flash the kernel can
> not use the initrd and it panics.
It would be helpful to know what board you have, and which formware
you're using.
So all I can say is: yes, there is a simple way. Probably it's a
two-step solution. The first step is installing PPCBoot, the second
step is using the "bootm" command.
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de
It is dangerous to be sincere unless you are also stupid.
- George Bernard Shaw
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: booting from flash
2002-03-04 19:42 booting from flash Steven Blakeslee
2002-03-04 19:54 ` Wolfgang Denk
@ 2002-03-04 20:00 ` Dan Malek
1 sibling, 0 replies; 3+ messages in thread
From: Dan Malek @ 2002-03-04 20:00 UTC (permalink / raw)
To: Steven Blakeslee; +Cc: 'linuxppc-embedded@lists.linuxppc.org'
Steven Blakeslee wrote:
> Is there a simple way to boot embedded linux from flash?
Ummm.....board, processor, boot rom, kernel version all would be helpful
to know, as this works on many systems by just flashing the zImage with
attached initrd.......
Thanks.
-- Dan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2002-03-04 20:00 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-03-04 19:42 booting from flash Steven Blakeslee
2002-03-04 19:54 ` Wolfgang Denk
2002-03-04 20:00 ` Dan Malek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).