From: Armin <akuster@pacbell.net>
To: "Wright, David" <dwright@infiniswitch.com>
Cc: linuxppc-embedded@lists.linuxppc.org
Subject: Re: Anyone got eepro100 working on Walnut?
Date: Wed, 17 Apr 2002 08:42:52 -0700 [thread overview]
Message-ID: <3CBD97FC.1060503@pacbell.net> (raw)
In-Reply-To: FF6CF34C346E724596A2FB5CAAB2C4978844FF@voyager.ops.infiniswitch.com
Wright, David wrote:
> I've been trying to get an Intel eepro100 card working on a
> Walnut board. I've tried both the 1.09 and 1.19 versions of
> the driver (eepro100.c). Initially, both failed the self-
> test step. I was able to get past that one by invalidating
> the dcache after issuing the self-test directive. However,
> I now find that the card is neither transmitting nor receiving
> reliably. I get messages like:
>
> eth1: Unknown receiver error, status=0x5048. [lots of these]
>
> and
>
> eth1: Transmit timed out: status 0050 0000 at 2/8 commands 00a00300 00a003000.
> eth1: Restarting the chip...
> eth1: Command unit failed to mark command 00030000 as complete at 6.
>
>
> Any suggestions (other than junking this card, which is not an option
> for me) most welcome.
>
> -- David Wright, InfiniSwitch Corp.
>
>
>
>
Yes,
What kernel version are you using? and what is the openbios version ?
armin
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2002-04-17 15:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-04-17 1:08 Anyone got eepro100 working on Walnut? Wright, David
2002-04-17 15:36 ` Matt Porter
2002-04-17 15:42 ` Armin [this message]
-- strict thread matches above, loose matches on Subject: below --
2002-04-17 19:22 Wright, David
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3CBD97FC.1060503@pacbell.net \
--to=akuster@pacbell.net \
--cc=dwright@infiniswitch.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).