From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3CBD97FC.1060503@pacbell.net> Date: Wed, 17 Apr 2002 08:42:52 -0700 From: Armin MIME-Version: 1.0 To: "Wright, David" Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: Anyone got eepro100 working on Walnut? References: Content-Type: text/plain; charset=us-ascii; format=flowed Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Wright, David wrote: > I've been trying to get an Intel eepro100 card working on a > Walnut board. I've tried both the 1.09 and 1.19 versions of > the driver (eepro100.c). Initially, both failed the self- > test step. I was able to get past that one by invalidating > the dcache after issuing the self-test directive. However, > I now find that the card is neither transmitting nor receiving > reliably. I get messages like: > > eth1: Unknown receiver error, status=0x5048. [lots of these] > > and > > eth1: Transmit timed out: status 0050 0000 at 2/8 commands 00a00300 00a003000. > eth1: Restarting the chip... > eth1: Command unit failed to mark command 00030000 as complete at 6. > > > Any suggestions (other than junking this card, which is not an option > for me) most welcome. > > -- David Wright, InfiniSwitch Corp. > > > > Yes, What kernel version are you using? and what is the openbios version ? armin ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/