From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <3CE28613.8090206@embeddededge.com> Date: Wed, 15 May 2002 12:00:19 -0400 From: Dan Malek MIME-Version: 1.0 To: OTAVIO ISAMU SUGENO Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: How to configure 2 ethernet devices References: Content-Type: text/plain; charset=us-ascii; format=flowed Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: OTAVIO ISAMU SUGENO wrote: > ......but when > configuring the devices using bootp/rarpd in message IP-Config only > appears: The purpose of IP-Config is to provide a minimal network configuration as to allow a network booting feature. It will not completely initialize a network environment suitable for little more than the NFS connection itself. > IP-Config: Got RARP answer form 10.0.0.10, my address is 10.0.0.100 > > I guess this is to the eth0 interface. The IP-Config sends requests on all configured interfaces and accepts the first one that replies. > What do I need to configure in the HardHat Linux to receive a second ip > address to the eth1? You need to run the real user-land network configuration scripts and utilities to properly configure a network on any system. It should also be done even when you are using IP-Config and network booting. -- Dan ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/