* current->mm
@ 2002-06-06 10:25 Stephan Linke
2002-06-06 17:01 ` current->mm Dan Malek
0 siblings, 1 reply; 2+ messages in thread
From: Stephan Linke @ 2002-06-06 10:25 UTC (permalink / raw)
To: Linuxppc-Embedded
Hi!
I'm running a 2.4.18 kernel on a 862/857 board.
In some codes related to pag allocation there's a myterious problem where
current->mm is zero.
I don't know anything about current current->mm except that it may be the
memory list of the current contex. But I think it should not be zero after a
page was allocated...
Any know issues in that direction?
Thanks 4 ur help, Stephan
#--
STEPHAN LINKE (dipl. inform); software engineer
epygi labs de gmbh; herrenstraße 23, 3. og, D-76133 karlsruhe
http://www.epygi.de; mailto:stephan.linke@epygi.de
phone 0721-20596-30; fax 0721-20596-59
----------------------------------------
Motto: „Wenn es defekt ist, dann isses kaputt!“
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: current->mm
2002-06-06 10:25 current->mm Stephan Linke
@ 2002-06-06 17:01 ` Dan Malek
0 siblings, 0 replies; 2+ messages in thread
From: Dan Malek @ 2002-06-06 17:01 UTC (permalink / raw)
To: Stephan Linke; +Cc: Linuxppc-Embedded
Stephan Linke wrote:
> In some codes related to pag allocation there's a myterious problem where
> current->mm is zero.
How have you determined this is a problem? Can you give us more details?
Thanks.
-- Dan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-06-06 17:01 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-06-06 10:25 current->mm Stephan Linke
2002-06-06 17:01 ` current->mm Dan Malek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).