From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3D04A571.4020309@cray.com> Date: Mon, 10 Jun 2002 08:11:13 -0500 From: David Updegraff MIME-Version: 1.0 To: Stefan Roese Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: 405GPr References: Content-Type: text/plain; charset=us-ascii; format=flowed Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Stefan We got one in I made some "proof of concept" changes to PPCBOOT/LinuxPPC to make it boot ok.. have not played with the extra clocking register strap values though; we just plopped it into our 405GP socket and ran @200 Mhz. Worked... I noticed that the PVR on the unit we got was a bit different: ibm specs said 0x50910950 ..but I got 0x50910951 Is there a doc. somewhere that tells us what the ranges of PVRs for this chip can legitimately be? >>>Anyone playing with adding IBM 405GPr to the cputable? >> >>Stephan said on the PPCboot list that he will have boards with >>them soon. He has done patches for PPCBoot so the kernel may not >>be far off. It will still be a couple of weeks before I get a >>board with one yet. > > > Right! As promised PPCBoot will be done next week, and linux will follow (if > I am still the first) pretty soon. > > Stefan. > > > -- David Updegraff / dave@cray.com / 218.525.1154 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/