MPC850 USB

MPC850 USB

[Christian Schroeder]

Hi all,

does anybody know, if the mpc850 (Mask rev. A, XPC850xxZTA) works
as a usb hostcontroller or do I need at least mask rev. B ?

Thanks Christian

Dr.-Ing. Christian Schroeder
Institut fuer Mikroelektronik- und Mechatronik-Systeme
Langewiesener Strasse 22
98693 Ilmenau
Telefon: +49 3677 678315
Telefax: +49 3677 678337
Mobil:   +49 173 5789172
e-mail:  christian.schroeder@imms.de
www:     http://www.imms.de/~christi/cs.html
pgp:     finger christi@finger.imms.de

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: MPC850 USB

[Dan Malek]

Christian Schroeder wrote:

> does anybody know, if the mpc850 (Mask rev. A, XPC850xxZTA) works
> as a usb hostcontroller or do I need at least mask rev. B ?

Well, "works" is a relative term.  The USB interfaces on these parts
were never really designed to be host controllers.  Depending upon
the application and the amount of software you want to write, you
can make them work.  There are some closed product, Rev. A parts using
the USB as a host controller.

Motorola listened to us (complaining :-), and did make some changes in
the Rev. B parts to reduce the software overhead, in particular the SOF
timing and the lower speed bus.  If you want to support a generic host
interface, you will have to use these parts along with the proper hardware
modifications outlined in their application notes.  There is Linux support
for these parts with these modifications.

Have fun!


	-- Dan


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/