* PPMC8260 - bdi2000.cnf
@ 2002-07-18 19:09 Kedar Madineni
2002-07-25 23:35 ` Kedar Madineni
0 siblings, 1 reply; 3+ messages in thread
From: Kedar Madineni @ 2002-07-18 19:09 UTC (permalink / raw)
To: linuxppc-embedded
Hi:
I am looking for a working configuration file for the PPMC8260 board for
use
with bdi2000. If you have one, would you please share it and post it
here.
Thanks,
Kedar
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: PPMC8260 - bdi2000.cnf
2002-07-18 19:09 PPMC8260 - bdi2000.cnf Kedar Madineni
@ 2002-07-25 23:35 ` Kedar Madineni
2002-07-26 6:29 ` Wolfgang Denk
0 siblings, 1 reply; 3+ messages in thread
From: Kedar Madineni @ 2002-07-25 23:35 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 286 bytes --]
Here is a bdi2000 config file, that works with PPMC8260.
Thanks,
Kedar
Kedar Madineni wrote:
>
> Hi:
>
> I am looking for a working configuration file for the PPMC8260 board for
> use
> with bdi2000. If you have one, would you please share it and post it
> here.
>
> Thanks,
> Kedar
>
[-- Attachment #2: bdi2000-ppmc8260.cnf --]
[-- Type: text/plain, Size: 8055 bytes --]
; -----------------------------------------------------------------------------
; Abatron bdiGDB configuration file for the Wind River ppmc8260
;
; This file has been tested with the following hardware:
; Abatron BDI2000 firmware revision 1.10
; PPMC8260-0074 PCA-00205-005 4101-0434 REV 10
; XPC8260ZU166A (Mask 0K26N) CPU
; 256MB Synchronous DRAM DIMM
; 16MB Flash SIMM - StrataFlash 28F640J3A - (4Mx16)
; 2 Devices (32 bit)
;
; The h/w reset configuration word for this board is at
; 0xFE000000. This will be programmed to 0x1E848205 when you load ppcboot
; (at 0xfe000000). The default onboard is 0x1C840502. You can have the ppcboot
; live at 0xfe000000 and have the vware at 0xfff000e0 (so that it skips
; the first 32 bytes) when executing it at 0xfff00100. If you don't want
; ppcboot, you don't need to do anything.
; All the switches are default from the factory
; ------------------------------------------------------
;
[INIT]
WREG MSR 0x00000000 ; clear MSR
; Normal setting
WM32 0xF00101A8 0xF0000000 ; IMMR == 0xF0000000
; If you ever erase the whole flash, use this setting for IMMR
;WM32 0x000101A8 0xF0000000 ; IMMR == 0x00000000
;
WM32 0xF0010000 0x42200000 ; SIUMCR
WM32 0xF0010004 0xFFFFFFC3 ; SYPCR == no watchdog
WM16 0xF001000E 0x0000 ; SWSR
WM32 0xF0010024 0xB0000000 ; BCR
WM8 0xF0010028 0x22 ; PPC_ACR
WM32 0xF001002C 0x71234560 ; PPC_ALRH
WM32 0xF0010030 0x89ABCDEF ; PPC_ALRL
WM8 0xF0010038 0x02 ; LCL_ACR
WM32 0xF0010040 0x80020000 ; TESCR1
WM32 0xF0010C80 0x00000000 ; SCCR == normal operations
;
;TSZ4 0x00000000 0x03000000
;
; Memory controller
;
; These writes configure /CS0 to be the 2MB FLASH at 0xFE00000
; and /CS6 to be the 4MB FLASH at 0xE000000
; These writes configure:
; CHIP SELECT BASE ADDRESS SIZE COMMENTS
; ----------- ------------ ---- --------
; /CS0 0xFE000000 8MB 8MB ON BOARD FLASH
;
WM32 0xF0010100 0xFE001801 ; BR0
WM32 0xF0010104 0xFE000856 ; OR0
;
WM32 0xF0010110 0x00000041 ; BR2
WM32 0xF0010114 0xF8002500 ; OR2
;
WM32 0xF0010118 0x08000041 ; BR3
WM32 0xF001011C 0xF8002500 ; OR3
;
WM32 0xF0010120 0x38001861 ; BR4
WM32 0xF0010124 0xFF0030C0 ; OR4
;
WM32 0xF0010128 0x32000801 ; BR5
WM32 0xF001012C 0x3FFF06F6 ; OR5
;
WM32 0xF0010130 0x00000000 ; BR6
WM32 0xF0010134 0x00000000 ; OR6
;
WM32 0xF0010138 0xF1000801 ; BR7
WM32 0xF001013C 0xFFFF06F6 ; OR7
;
WM32 0xF0010140 0x00000000 ; BR8
WM32 0xF0010144 0x00000000 ; OR8
;
WM32 0xF0010148 0x00000000 ; BR9
WM32 0xF001014C 0x00000000 ; OR9
;
WM32 0xF0010150 0x00000000 ; BR10
WM32 0xF0010154 0x00000000 ; OR10
;
WM32 0xF0010158 0x00000000 ; BR11
WM32 0xF001015C 0x00000000 ; OR11
;
;
; Initialize the SDRAM on the 60x bus.
;
;WM32 0xF0010190 0xC265A562 ; PSDMR: normal
WM32 0xF0010168 0x00000200 ; MAR
WM32 0xF0010170 0x00000000 ; MAMR
WM32 0xF0010174 0x00000000 ; MBMR
WM32 0xF0010178 0x00000000 ; MCMR
WM16 0xF0010184 0x3200 ; MPTPR
WM32 0xF0010188 0x00000000 ; MDR
WM32 0xF0010190 0x412EB45A ; PSDMR
WM32 0xF0010194 0x4066A552 ; LSDMR:
;
WM8 0xF0010198 0x08 ; PURT
WM8 0xF001019C 0x0E ; PSRT
;
WM8 0xF00101A0 0x08 ; LURT
WM8 0xF00101A4 0x0E ; LSRT
;
WM32 0xF00101AC 0x00000000 ; PCIBR0
WM32 0xF00101B0 0x00000000 ; PCIBR1
WM32 0xF00101C4 0x00000000 ; PCIMSK0
WM32 0xF00101C8 0x00000000 ; PCIMSK1
WM16 0xF0010220 0x0000 ; TMCNTSC
WM32 0xF0010224 0x00000000 ; TMCNT
WM16 0xF0010240 0x0000 ; PISCR
WM32 0xF0010244 0x00000000 ; PITC
WM32 0xF0010248 0x00000000 ; PITR
;
WM16 0xF0010C00 0x0000 ; SICR
WM32 0xF0010C04 0x3C000000 ; SIVEC
WM32 0xF0010C08 0x00400000 ; SIPNR_H
WM32 0xF0010C10 0x05309770 ; SIPRR
WM32 0xF0010C14 0x05309770 ; SIPRR_H
WM32 0xF0010C18 0x05309770 ; SIPRR_L
WM32 0xF0010C1C 0x00000000 ; SIMR_H
WM32 0xF0010C20 0x00001800 ; SIMR_L
;
; IO Pin Configuration SETUP
WM32 0xF0010D00 0x00400000 ; PDIRA
WM32 0xF0010D04 0x00C00000 ; PPARA
WM32 0xF0010D08 0x00000000 ; PSORA
WM32 0xF0010D0C 0x00000000 ; PODRA
WM32 0xF0010D10 0x00C00000 ; PDATA
WM32 0xF0010D50 0x00403000 ; PDATC
WM32 0xF0010D60 0x00400000 ; PDIRD
WM32 0xF0010D64 0x00C00000 ; PPARD
WM32 0xF0010D70 0x00C30000 ; PDATD
WM16 0xF0010D94 0xFFFF ; TRR1
WM16 0xF0010D96 0xFFFF ; TRR2
WM16 0xF0010DA4 0xFFFF ; TRR3
WM16 0xF0010DA6 0xFFFF ; TRR4
;
WM32 0xF0010C80 0x00000001 ; SCCR
WM32 0xF0010C88 0x0831C001 ; SCMR
WM32 0xF0010C90 0x00000027 ; RSR
WM32 0xF0010C94 0x00000000 ; RMR
;
WM32 0xF00119F0 0x00011144 ; BRGC1
WM16 0xF0011A0E 0x7E7E ; DSR1
WM16 0xF0011A2E 0x7E7E ; DSR2
WM16 0xF0011A4E 0x7E7E ; DSR3
WM16 0xF0011A6E 0x7E7E ; DSR4
WM16 0xF0011A82 0x4823 ; SMCMR1
WM16 0xF0011A92 0x4823 ; SMCMR2
WM8 0xF0011A98 0x03 ; SMCM2
WM16 0xF0011AA0 0x0020 ; SPMODE
;
WM32 0xF0010190 0x212EB45A ; PSDMR1:
WM8 0x00000000 0xFF ; Access SDRAM:B0
WM8 0x08000000 0xFF ; Access SDRAM:B0
WM32 0xF0010190 0x092EB45A ; PSDMR2:
WM8 0x00000001 0xFF ; Access SDRAM:B1
WM8 0x08000001 0xFF ; Access SDRAM:B1
WM32 0xF0010190 0x192EB45A ; PSDMR3
WM8 0x00000110 0xFF ; Access SDRAM
WM8 0x08000110 0xFF ; Access SDRAM
WM32 0xF0010190 0x412EB45A ; PSDMR4
;
WM16 0xF001130C 0x7E7E ; FDSR1
WM16 0xF001132C 0x7E7E ; FDSR2
WM16 0xF001134C 0x7E7E ; FDSR3
;
WM8 0xF0011864 0xFF ; I2ADD
WM8 0xF0011868 0xFF ; I2BRG
;
WM32 0xF00119F0 0x000100D6 ; BRGC1
WM32 0xF00119F4 0x000100D6 ; BRGC2
;
; To unprotect the flash for programming, enable the following
; lines - Thanks to Brad.Kemp@seranoa.com
;
;WM32 0xFE000000 0x60606060 ; unprotect sequence
;WM32 0xFE000000 0xD0D0D0D0 ; unprotect sequence
[TARGET]
CPUTYPE 8260 ;the CPU type (603EV,750,8240,8260)
JTAGCLOCK 0 ;use 16 MHz JTAG clock
BDIMODE AGENT ;the BDI working mode (LOADONLY | AGENT | GATEWAY)
BREAKMODE SOFT ;SOFT or HARD, HARD uses PPC hardware breakpoints
DCACHE FLUSH
VECTOR CATCH ;catch unhandled exceptions
;MMU XLAT
PTBASE 0xF0 ; try to put this is after I boot:
REGLIST ALL
POWERUP 5000
;BOOTADDR 0xFFF00000
;SIO 2002 9600 ; TCP port for console
;
;STARTUP RUN
;
;
[FLASH]
; 28F640J3A in 16 bit mode, sector size is 256 = 0x40000, Start address is 0xFE000000
CHIPTYPE STRATAX16 ;Flash type (AM29F | AM29BX8 | AM29BX16 | I28BX8 | I28BX16)
CHIPSIZE 0x1000000 ;The size of one flash chip in bytes (e.g. AM29F010 = 0x20000)
BUSWIDTH 32 ;The width of the flash memory bus in bits (8 | 16 | 32 | 64)
;
;
FILE /bdi2000/ppcboot-ppmc8260.bin
WORKSPACE 0xF0000000
FORMAT BIN 0xfe000000
ERASE 0xfe000000
;ERASE 0xfe040000
;
;
[HOST]
;FORMAT ROM
IP 10.0.0.1
;LOAD MANUAL ;load code MANUAL or AUTO after reset
;
;
[REGS]
DMM1 0xF0000000
FILE /bdi2000/REG8260.DEF
;
; kmadineni@occamnetworks.com
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2002-07-26 6:29 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-07-18 19:09 PPMC8260 - bdi2000.cnf Kedar Madineni
2002-07-25 23:35 ` Kedar Madineni
2002-07-26 6:29 ` Wolfgang Denk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).