From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <3D76870E.5244CED5@seranoa.com> Date: Wed, 04 Sep 2002 18:19:58 -0400 From: Tom Stefanski MIME-Version: 1.0 To: linuxppc-embedded@lists.linuxppc.org Subject: Can't disassemble my device driver Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: I have a adatron bdi 2000 connected to my target board and have successfully load the linux kernel and set breakpoint in schedule However when I load my device driver, it's text section is a 0xD11D6060 and the kernel is a 0xC00xxxxx. When is disassemble any routine in my driver, I get all zeros. I have MMU xlate set in the config file and I program the mmu correctly since I can break a schedule. Any help would be apprecciated Tom ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/