* RE: Character LCD
@ 2002-09-26 2:03 Sergiy Kovtun
2002-09-27 9:15 ` Julien EYRIES
0 siblings, 1 reply; 2+ messages in thread
From: Sergiy Kovtun @ 2002-09-26 2:03 UTC (permalink / raw)
To: julien.eyries; +Cc: linuxppc-embedded
Hello,
I had an experience work with :
MSC-C162DGLY-1N (character)
MG-240128-1 (graphic)
but only via parallel port x86 MS-DOS and Linux
2.0.xx.
It was easy and stable.
About hardware at:
http://www.truly.de/datasheet/character.asp
Best wishes
Sergiy
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Character LCD
2002-09-26 2:03 Character LCD Sergiy Kovtun
@ 2002-09-27 9:15 ` Julien EYRIES
0 siblings, 0 replies; 2+ messages in thread
From: Julien EYRIES @ 2002-09-27 9:15 UTC (permalink / raw)
To: linuxppc-embedded
hi !
thank you for your answers .
i think a LCD with serial interface could just work fine for me.
However , it seems most of this small LCD panels comes with a parallel
interface (8+3 wires) and you need to add a small micro-controller to do
the parallel->serial conversion.
I was wondering if I could connect the LCD directly to the PPC 8260
and use a linux driver to handle the parallel->serial conversion .
If anyone know .. tell me :-)
Bye
Julien .
--
Julien Eyries
R&D engineer
Thales Broadcast & Multimedia (ex-thomcast)
email: julien.eyries@thales-bm.com
fax: 33(0) 1 34 90 31 10
tel: 33(0) 1 34 90 31 01
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-09-27 9:15 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-09-26 2:03 Character LCD Sergiy Kovtun
2002-09-27 9:15 ` Julien EYRIES
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).