From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3DB422C2.D0139C67@esteem.com> Date: Mon, 21 Oct 2002 08:52:34 -0700 From: Conn Clark MIME-Version: 1.0 To: Patrick Mahoney Cc: May Ling List Subject: Re: mpc8xx - power save modes - PIT References: <20021010183502.GA843@segfault.usine.8d.com> <3DA5F5EC.2844DE06@esteem.com> <20021010230042.GA8690@segfault.usine.8d.com> <3DA62C69.A5BD884F@esteem.com> <20021021133451.GA16540@segfault.usine.8d.com> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Patrick Mahoney wrote: > > Hi Conn, > > I apologize for sticking to the topic... Getting to doze low mode is > very important to our project... > > You say you got the ppc version of the 2.4.19 kernel from > ftp.kernel.org... This can't be, since the latest available ppc patch > is for the 2.4.18 kernel... > > So what kernel version/provider did you use your patch on? > > Once again, thanks a lot... > > Pat Mahoney > > > > > I have played with some of the power saving modes on our custom > > > > 850 board and have had no problems. I have toyed with the Doze High and > > > > Doze Low modes in the idle loop. Attached is a hacked up idle loop for > > > > kernel 2.4.19 that works for me. > > [...] > > > I forgot to mention my kernel source tree was directly from kernel.org I got my kernel from ftp.kernel.org . I belive the patches to 2.4.18 were submitted and included into 2.4.19 from ftp.kernel.org . I don't think there has been an official patch released for 2.4.19 as of yet. good luck, Conn -- ***************************************************************** If you live at home long enough, your parents will move out. (Warning they may try to sell their house out from under you.) ***************************************************************** Conn Clark Engineering Stooge clark@esteem.com Electronic Systems Technology Inc. www.esteem.com ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/