Hi

Hi

[RamanaYV]

I was working in MPC860T customised board and trying to port linux  through
PPCBOOT.
can you give me breif guidence to port linux-2.4.19 based kernel.

thanX to all


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: Hi

[Jerry Van Baren]

If you want responses, please use a better subject line next time.  I (and
probably many others) delete emails with silly subject lines like "Hi"
without reading them because 99.99% of the time they are spam.  The only
reason I read yours is because Wolfgang responded to it.

gvb


At 09:00 AM 1/16/2003 -0500, wd@denx.de wrote:

>In message <Pine.OSF.4.21.0301161051060.11807-100000@ws9.cdotb.ernet.in> you
>wrote:
> >
> > Please forgive me for an off the track question. We want to develop a
> > Menu driven Console based user interface for MPC8260. The MPC8260 is
> > connected with a Windows based PC with Hyperterminal. We plan to display
> > the menu options on Hyperterminal screen running on Windows based PC. If
> > anybody has done similar things please inform me.
>
>Use [n]curses.
>
>
>Wolfgang Denk
>
>--
>Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
>Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
>Only in our dreams we are free.  The rest of the time we need  wages.
>                                     - Terry Pratchett, _Wyrd Sisters_
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Ramdisk details; execve("/bin/sh") output

[Prakash kanthi]

Hi FOlks,

I have couple of questions on ramdisk operation.

1. How can i see the contents of a ramdisk? I
downloaded one from denx and i want to see what is in
there?
2. In ${LINUX_ROOT}/init/main.c -> init(), after
prepare_namespace (which basically does the inintrd
mount), open syscall on '/dev/console' fails. But
still control goes further and executes
'execve("/bin/sh")'. My question is where does the
output of /bin/sh execution goes? Not to my dumb
terminal? I see nothing. Infact my dumb terminal just
stops there. No kernel panic. Any clues?

Note: In my case i do not have enough infrastructure
to have the  standard NS16550 is working. So i have to
port some other driver as my serial driver. ANything
related to this?


Thanks,
Prakash


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Hi

[Anish]

Hi everybody,
Please forgive me for an off the track question. We want to develop a
Menu driven Console based user interface for MPC8260. The MPC8260 is
connected with a Windows based PC with Hyperterminal. We plan to display
the menu options on Hyperterminal screen running on Windows based PC. If
anybody has done similar things please inform me.

anish nema


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: Hi

[Wolfgang Denk]

In message <Pine.OSF.4.21.0301161051060.11807-100000@ws9.cdotb.ernet.in> you wrote:
>
> Please forgive me for an off the track question. We want to develop a
> Menu driven Console based user interface for MPC8260. The MPC8260 is
> connected with a Windows based PC with Hyperterminal. We plan to display
> the menu options on Hyperterminal screen running on Windows based PC. If
> anybody has done similar things please inform me.

Use [n]curses.


Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
Only in our dreams we are free.  The rest of the time we need  wages.
                                    - Terry Pratchett, _Wyrd Sisters_

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

hi

[Sarnath Kannan]

Hi everybody,
 I m trying to  enable linux of a 8240 board,.
I m aware of journeman from mvista,, m doing to just
to understand things in detail
 I need help on OpenPIC in PPC. what is this for ?
I searced the net and found to my dismay that
the spec is licensed by INTEL.
  So can any1 of u tell me how to enable interrupts
on 8240 board ? I am aware of  mapping the EUMB into
the PCI memory space before touching EPIC.


thanks in advance

Sarnath


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/